Insignia LCDTV26 26 in. Television - Answered Questions & Fixed issues

Usually DIN-metric thread screws, 20mm x 1.0mm pitch They're called M6

Did you try adjusting the tracking control on machine?

Did you re-connect your insignia to an Antenna? Also if your are trying to receive over air broadcast in that part if your house it's possible you'll need a more powerful antenna.

Check its signal input cable connections. There shouldn't be any other problem.

Use a cheap Universal Remote: They come with a sheet for all applications, so just follow directions and your OK.

That is because you did not pay the bill

It sounds that the main digital board has the fault. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis.

I would suggest using spacers

If you wish to get some details, check the site linked here. Pull up older posts. Check the site in 'Mosaic' view. It will make search easy. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given.

Press INFO, DISPLAY or CALL key on the remote hand set.

Check its picture settings; aspect ratio.

I would recommend calling our Product Support Team to schedule repairs at: U.S. and Canada - 1-877-467-4289Mexico - 01-800-926-3000 We're here to answer your requests daily from 7 am - 12 am CT.

The power supply will need to be replace or repair if the LCD failed to switch to the blue light.
I repair these power supplies.
Let me know if you need further assistance.

My name is mark and you can reach me @ 707029723 and I'll let you know what pretty suse the problem

Although tie included downloadable manual is for the 32 inch TV it will probably work for your TV as well...read it carefully: http://www.insigniaproducts.com/cms/documents/IS-LCDTV32%20UM%20EN_SP_FR.pdf

To connect with what?

Issues of this type can generally only be resolved by repairs. Service can be obtained by carrying your TV in to the place of purchase.

It could well be your remote control has a problem. Try removing the batteries from the remote control and see if the problem goes away, if it does, try new bateries on the remote controller, if that does not work you may have to get a new remote controller

Check the back-light inverter boards, and CCFL lamps inside the panel.