20 Most Recent Compaq Presario 5000 PC Desktop - Page 7 Questions & Answers

You can generally use any USB port to support a USB device. There are minor details such as speed but the computer will generally tell you if you plug a device into a slow (USB 1.1) port when the device will work better with a USB 2.0 or 3.0 port. The newer your computer, the more likely it is that you will have all faster ports.

ck its settings

What type of internet connection are you using? if you are using through your LAN port then check If your LAN card driver is properly install and updated. If you were using through LAN then was there any IP address before formated your laptop?

The USB ports are usually located on the backside of the Computer Cabinet. And there can be some other locations depending on the manufacturer.Hope this helps, Mrityunjay.

login with guest account then use the seth.exe and rename it to cmd.exe log ou and login hit shift key five times and presto you have cmd windowthen type net user administrator * type in your new pass

rtl120.bpl appears to be linked to the Tune Up Utilities program. You might try reinstalling this program and be sure that your antivirus is set to allow this program to run.

what happens when you try? If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

Check to make sure all ribbon and power cables are securely attached to the CD/DVD-ROM if it shows up in my computer and the device manager you will need to replace the driver.

The LCD Screen is going bad and needs to be replaced.

How full are your C and D drive?

I don't understand what you are trying to say, but this is what I think you're saying. The onboard video card went bad and now you need to put in another one so that you can connect the monitor.If that's true, you don't put another video card on the motherboard. You go out and purchase a Video Card that goes into one of the available PCI Slots on the back of the computer. It goes inside, but sticks out the back so you can connect the cable from the monitor to it.

No video at all? Make sure you have the connection of the video cable in good on both the computer and the monitor. Try connecting another monitor and see if it works. If not, your video card in the computer needs to be replaced.Try the monitor on another computer and see if it works. If not, the monitor is bad and needs to be replaced.

I could have told you you were loading Windows 7 by the symptoms. Try running a Malware program with a register edit-register function in it. If you are switching from XP Pro. you will need to clear your register and all command and drive to . Set BIOS to boot from DVD/CD first then set the hard drive to boot second. Windows. Also if you have access to another computer ask microsoft for tech support.

Restart your computer During the boot process you will see on the screen to press a certain key to enter setup usually the delete or F2 key Press and hold that key during the boot up process to enter BIOS using the arrow keys load failsafe defaults or load optimized defaults press escape then press f10 to save to cmos to restart if this fails to fix the problem During the boot process tap the f8 button three times this will boot into safe mode where the only things working will be your mouse and keyboard enabling you to attempt to repair your computer you could select the option start at last known configuration that worked this will tell what file has been corrupted or missing you might be able to work your way through problem if you are unable to find a solution restart back into safe mode you might need to select your operating system to load into safe mode click start control panel administration tools computer management in the left panel events + to expand then system you will see all errors in right panel right click select properties this will tell you what has occurred and the time it occurred you might use the system restore to restore your system to an earlier time click start all programs accessories system tools you should see your system restore option hope this helps you

download and install Bytes Anti-Malware. Run a full PC scan and remove the spyware. This is a completely free anti-spayware software and gets rid of all your spayware. I cant live without it. Hope this Helps. Please Rate!!!

When you boot up to the log in screen type in administrator as user to log in if you cant log in

Restart your computer during the boot up process you will see on the screen for a short amount of time press a certain key to enter set up press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there

if this fails to remove your password

The most common way that we know on how to reset or clear the BIOS password is to physically remove the power from the computer by disconnecting the power plug and then removing the Cmos battery for 30 minutes from the motherboard. Another way is to reset the clear CMOS jumper on the motherboard itself. Both of the 2 methods mentioned works because most motherboards use a battery to sustain the BIOS/CMOS settings for the motherboards PROM chip. So by cutting off cmos the battery power, the BIOS/CMOS settings will be erased.

click start control panel Open User Accounts in Control Panel. On the Users tab, click the name of the user whose password you want to change, and then click Reset Password. In New password and Confirm new password, type the new password, and then click OK. Notes You can change passwords only for local computer accounts, such as guest, administrator, or accounts you create for your computer. You cannot change your network logon password in User Accounts. To change your own password, press CTRL ALT DELETE and then click Change Password also if you are not the computer administrator and have not assigned a bios password during the boot up process you will see on the screen for a short amount of time press a certain key to enter set up Press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there also click start control panel user accounts on the users tab,click the name of the computer administrator you must have full control can change the password there hope this helps you