20 Most Recent Lexmark X4270 All-In-One InkJet Printer - Page 9 Questions & Answers


Connect the printer with your PC and install the driver from the disk provide by vendor and follow the on screen instruction.

Lexmark X4270... | Answered on Mar 13, 2011


Sometimes the ink cartridge carrier won't automatically move to its loading position even when the printer is on and the cover is open. Just unplug the printer from the power source. With the cover open, hold the solid white strip and gently slide the cartridge carrier to the center of the printer. Remove the used cartridges. Load the new cartridges. Close the cover. Plug the printer back to the power source.

Lexmark X4270... | Answered on Mar 09, 2011


Please refer to this article in the Lexmark website on How to install ink cartridges in Lexmark X4200 Series AIO. I hope this helps.

Lexmark X4270... | Answered on Mar 09, 2011


1203 error indicates a defective cartridge is detected. It would be best not to use your burnt black cartridge anymore to prevent further damage to the printer. Try to replace it with a new genuine cartridge. However, if error continues even with a new cartridge, please contact Lexmark technical support for additional assistance. Thanks.

Lexmark X4270... | Answered on Mar 09, 2011


The printer requires to be plugged into the power source with the power cord connected to its power adapter to function. Please contact Lexmark technical support for assistance if you lost the cord or the adapter. Thanks.

Lexmark X4270... | Answered on Mar 08, 2011


YES only need ink to print

Lexmark X4270... | Answered on Mar 02, 2011


It sounds like you need to reinstall your drivers. Click the download drivers button on THIS page and reinstall them. Hope this helps =]

Lexmark X4270... | Answered on Mar 01, 2011


Hello,

1.Disconnect the power cable from the back of the printer.

2. Hold down the Stop/Clear button. (To the right of the Black Copy button.)

3.While keeping the button pressed down, reconnect the power cable. A message on the LCD will display MEMORY CLEARING.
Note: The Fax, Copy and Scan buttons will remain ON until the message disappears. Only the Fax button should be ON when the function is complete.

Thanks for using Fixya.

Lexmark X4270... | Answered on Feb 27, 2011


You can adjust the quality and darkness on the front panel
Depending on the type of document you are trying to copy:
Select the type to one of the following.

CONTENT TYPE

Specify the type of document in the ADF:

  • Text and graphic (default)
  • Photo
  • Text only
  • Line drawing
If that does not produce the quality desired, try adjusting the Lightness / Darkness setting.


If the problem is with all copies, the optical scanner may need cleaning.

Improving print quality If you are not satisfied with the print quality of your document, make sure you:
  • Use the appropriate paper for the document.
  • Use paper that is a heavier weight, bright white, or coated.
  • Select a higher print quality:
  1. From your software program, click File onestep.gif Print.

The Print dialog box appears.

  1. From the Print dialog box, click Properties, Preferences, Options, or Setup.
  2. From the Quality/Speed area, select Better or Best.
I
Cleaning the scan lens and white roller If you notice poor image quality in scans, faxes, or copies, you may need to clean the scan lens and the white roller.
  1. Unplug the power cord and the phone line from the wall.
  2. Open the control panel.
  3. Pull the roller lever forward, and then lift the white roller out of the All-In-One. aremvrol9.jpg

Note: The scan lens is located under the white roller.

  1. Use a clean, lint-free cloth dampened with water to wipe the white roller and the scan lens.
  2. Reinstall the white roller.
  3. Reconnect the power cord and the phone line.

Hope this helps, Jim

Lexmark X4270... | Answered on Feb 23, 2011


you can download driver on this page
http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_X4270&segment=SUPPORT&userlocale=RO_RO&frompage=null#1

If this helps orsolves the issue, please rate it and give a testimonial for myresponse!

Lexmark X4270... | Answered on Feb 23, 2011


try to download the software for the Printer from the internet on the Lexmark.com web site. it's free and reload it into you computer

Lexmark X4270... | Answered on Feb 19, 2011


In this link you can see the user's guide.
This is a HTML format, then your Index is at your left.
Click in this left list the topic you want to read, and the information appears at the right box, like a web page.

Good luck. Remember to rate my answer, please.

Lexmark X4270... | Answered on Feb 17, 2011


Hi!
If you downloaded the driver for the x4200 series then that is alright. But to make sure redownload the driver and reinstall it. After that unplug the USB connector to your computer and then restart the computer. Wait until you have gone into windows and logged in before plugging back the usb connector. Wait for windows to acknowledge the connection by showing an installing device message or by a series of tones. Check on your printer devices if your printer is online. Try printing a test page. If you are still getting a problem make sure to jot down the error message you are getting and get back to us here at fixya.

Lexmark X4270... | Answered on Feb 11, 2011


You can download your Lexmark driver from here:

http://driverscollection.com/?H=X4270&By=Lexmark

Just be sure to select the right Windows version.

Success !

Lexmark X4270... | Answered on Feb 08, 2011


error 1203 is cartridge error, cartridges has a short
1. press power button to turn off your printer
2. unplug your printer to the wall outlet
3. plug in your all in one
4. reinstall your cartridges
if this does not resolve the problem replace your cartridges with new one
for more trouble shooting option :
1. click start> program> lexmark 4200 series> lexmark solution center
2. click the trouble shooting tab on the left side of the screen
i hope this helpful
thank you for using fixya

Lexmark X4270... | Answered on Feb 03, 2011


The line is probably not from the ink cartridges or nozzles (assuming regular printing doesn't streak). Streaks on copies and transmitted faxes are usually due to dirt or problems on the scanner unit. First clean the flat bed of the scanne. If you have an automatic document feeder, clean that.

Clean with a lint free cloth moistened with a little water or glass cleaner. Make sure no foreign objects are in the ADF path or on the glass. For pictures see the Lexmark support site: http://support.lexmark.com/index?page=product&linkSelected=node0&locale=EN&userlocale=EN_US#1. Then enter "streak on copy" - the solution comes up in a pop up.

If the streak is shrinking, then copy a blank white piece of paper to identify where to clean further. Try scanning another page with a small mark on it. (These are particularly helpful for cleaning the ADF.)

If the mark occurs when you print, then check if you have a damaged cartridge or other ink that has spilled inside the printer.

I hope this helps.

Cindy Wells

Lexmark X4270... | Answered on Feb 03, 2011

Not finding what you are looking for?
Lexmark X4270 All-In-One InkJet Printer Logo

1,500 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

X Lexmark

  • X Lexmark

Most Popular Question

lexmark s405 isn 39 t printing color

  • Office Equipment & Supplies
Loading...