Top 20
RCA 24V511T 24" TV - Page 4 Questions & Answers
Model LED32B30RQ need 4 digit code to program universal remote. RCA TV
The 4-digit code to program a universal remote to work with a RCA LED32B30RQ TV model is likely to be one of the following:
11447 11758 11442
To program the universal remote to work with the RCA LED32B30RQ TV:
- Turn on the TV
- Press and hold the "Setup" button on the universal remote until the "TV" button blinks twice.
- Press the "TV" button on the remote.
- Enter the 4-digit code for your TV using the number buttons on the remote.
- Press the "Power" button on the remote. The TV should turn off.
- Press the "Setup" button again to lock in the code.
If the TV does not turn off after entering the code, please try the other codes listed above. If none of the codes work, you may need to refer to the universal remote manual or contact the manufacturer for further assistance.
Note: The method to program the universal remote may vary depending on the remote brand and model
RCA LED 50B45RQ tv turns on, lights up screen, but screen is solid blue.
It sounds like you may have an issue with the backlight of your TV. If a backlight is not getting adequate power, it can cause the screen to appear blue or have "flashing white splotches". The best way to resolve this issue is to have a qualified technician inspect the TV to determine if there are any issues with the backlight power supply. If there is an issue with the power supply, they will be able to replace it and resolve the issue.
I have a RCA dvd home theatre system rtd317 & the tray opens & closes with or without a disk & won't read the disk.
If your RCA DVD home theatre system RTD317 tray is opening and closing without reading the disk, and you've tried unplugging it, cleaning the laser lens, and the motor doesn't seem to be working, it's possible that there may be an issue with the motor or with the disk mechanism itself. Here are a few troubleshooting steps you can try:
- Check the disk: Make sure that the disk you are trying to play is clean and free of scratches. Sometimes a dirty or scratched disk can prevent the player from reading it.
- Reset the system: Try resetting the system to its default settings. To do this, unplug the unit from the power source for a few minutes, then plug it back in and turn it on.
- Check the motor: When the tray closes, listen closely to see if you can hear the motor spinning. If you can't hear the motor, there may be an issue with the motor or with the power supply to the motor. In this case, it may be necessary to have the motor replaced.
- Check the disk mechanism: If the motor is working but the disk still won't spin, there may be an issue with the disk mechanism itself. In this case, it may be necessary to have the disk mechanism repaired or replaced.
- Contact customer support: If none of these steps work, it may be best to contact the manufacturer's customer support for further assistance or to have the unit repaired by a professional.
Remember to always follow the manufacturer's instructions and safety guidelines when working with electronic devices.
I have RCA RTU4300 TV that has a picture issue.
Tv boards are fairly easy to replace. usually there are 2. one is the power board. should be obvious to see as the wire that plugs into the AC wall outlet is connected to it. The other will be the one your needing. Look on the board and find the part number. Then the search begin. Let me know if i can help further.
My RCA TV model RLDED3258 HAS A ERROR SAYING NO SIGNAL.
- Check the cables: Ensure that all cables are securely connected to the TV and to the device you're trying to connect. Make sure the cables are not damaged or frayed. Try a different HDMI cable to see if that resolves the issue.
- Check the input: Make sure the input you are using is selected on the TV. You can usually do this by pressing the "Input" or "Source" button on your remote control.
- Check the device: Make sure the device you're trying to connect (such as a DVD player or cable box) is turned on and that it's set to output video to the TV.
- Check the TV's settings: Some TVs have a setting that allows you to select which type of device you are connecting (such as a DVD player or cable box). If your TV has this setting, make sure it's set correctly.
- Restart the TV: Sometimes simply restarting the TV can resolve the issue. Turn off the TV and unplug it from the power source for a few minutes, then plug it back in and turn it on.
If none of these steps resolve the issue, then it may be necessary to replace the logic board.
My rca TV has no color in apps
If your RCA TV is not displaying color in the apps, there are a few potential causes and steps you can try to fix the issue:
- Check the TV's color settings: Make sure the TV's color settings are set correctly. You can try adjusting the color settings to see if this fixes the problem.
- Check the HDMI connection: If you are using an HDMI cable to connect the TV to a device (such as a cable box or streaming device), make sure the connection is secure and the HDMI cable is not damaged.
- Restart the TV: Sometimes a simple restart of the TV can fix minor issues. Try turning the TV off and on again to see if this fixes the problem.
- Check for software updates: The TV may need a software update to fix the issue. Check for updates and install any available updates.
If these steps do not fix the problem, there may be an issue with the TV itself or with the device you are using to access the apps. In this case, it is recommended to contact RCA customer support or a TV repair technician for further assistance.
55' polaroid tv & rca universal remote I can put code in for the menu to show up & it won't let me program reset or scan for channels or change cable to antenna nothing what am I doing wrong
It sounds like you may be having trouble programming your RCA universal remote to work with your 55" Polaroid TV. There are a few things you can try to troubleshoot the issue:
- Make sure you are using the correct code for your TV. RCA universal remotes come with a list of codes for different brands of TVs, so you will need to refer to the instructions for your remote to find the correct code for your TV.
- Try manually inputting the code. Some universal remotes require you to manually enter the code for the device you are trying to control, rather than using the automatic search function. Refer to your remote's instructions for more information on manual code entry.
- Check the batteries in your remote. Weak or dead batteries can cause issues with remote functionality.
- Check if the remote is in the correct mode for the device you are trying to control. Some universal remotes have multiple modes for controlling different types of devices, such as TV mode, DVD mode, etc.
- Check if you have the right remote for your TV, if not, try to find the right remote.
If none of these troubleshooting steps work, you may need to contact the manufacturer of your TV or the manufacturer of your universal remote for further assistance.
My recommendation
https://amzn.to/3WfBNpJ
https://amzn.to/3INRZeH
I have a Digital Lab DLU-5004B universal remote. The codes for a RCA TV do not work on my TV
If the codes for your Digital Lab DLU-5004B universal remote are not working with your RCA TV, there are a few things you can try to troubleshoot the issue:
- Check the manufacturer's website: Some manufacturers may have updated or additional codes available for their TVs. You can check the manufacturer's website to see if there are any new codes that may work with your TV.
- Try a different code: If the codes provided in the remote's manual are not working, you can try using a different code for your TV brand. You can find a list of codes for different TV brands online or in the manual for your universal remote.
- Check the remote's battery: Make sure the remote's battery is charged and properly installed. A weak or dead battery can cause the remote to malfunction.
- Reset the remote: Resetting the remote may help resolve any issues with the remote's programming. To reset the remote, remove the battery and press any button on the remote for at least 15 seconds. Then, reinsert the battery and try the codes again.
- Check the TV's compatibility: Some TVs may not be compatible with universal remotes, in which case you will need to use the TV's original remote or a different universal remote that is compatible with your TV.
If these troubleshooting steps do not resolve the issue, it is possible that there is a problem with the remote or the TV itself. In this case, it is recommended to bring your TV and remote to a professional for further diagnosis and repair.
Hello. I have a RCA LED50B45RQ TV that has standby light illuminated when turned on with remote white flashes on left side of screen for a couple seconds with no audio or video.
Your RCA LED50B45RQ TV appears to have a problem with the display and audio.
When the TV is turned on and the remote is used, the standby light illuminates, and the screen flashes white on the left side without audio or video.
Various factors could be to blame for this problem.
A few troubleshooting tips are provided below:
- Check the connections: Make sure that all the connections between your TV, cable box, or streaming device are securely plugged in.
- Check the settings: Ensure that the TV is set to the correct input and that the cable box or streaming device is set to the correct output.
- Check the backlight: Some TVs have an adjustable backlight setting. Ensure the backlight setting is turned on and set enough.
- Check the cable: If the cable that connects the TV to the wall outlet is damaged, the TV won't turn on. Try unplugging the TV, waiting a few minutes, and plugging it back in.
- Check the power supply: The power supply could be malfunctioning. It could be damaged or not provide enough power to the TV.
- Check the Main Board: The main board controls all TV functions. It could be malfunctioning, which is causing the TV not to turn on or display correctly.
- Contact the manufacturer: If none of the above solutions work, it may be necessary to contact the manufacturer for further assistance. Your TV may require repair or replacement.
What could be wrong with RCA LED55G65RQ with pilot light blinking red?
I assume "pilot light" is the standby light you're referring to. On most Funai brands including RCA, a continual flash of the standy light indicates inverter shutdown, pointing to bad LED backlights, new ones can be ordered from shopjimmy.com and you can install them yourself, no special tools are needed, however watch a couple youtube vids to see some tips on how to do it.
RCA F19421 service menu please. I need to fix the tv's overscan.
RCA Service Menu Instructions
In order to access the service menu on your RCA TV you will need to have a remote, if your remote is lost or damaged we recommend that you purchase a
Replacement Remote before trying to access the service menu on your set.
Method 1
- Press the INPUT button on the remote.
- Then press the 2, 5, 8, 0 buttons in quick succession.
Method 2
- Press the MENU button on the remote.
- Then press the 1, 1, 4, 7 buttons in quick succession.
Categories:
Not finding what you are looking for?
