Top 20 RCA 24V511T 24" TV Questions & Answers


if the power was out you may have to reset the box or turn the box back on so that the signal can reach the tv receiver

RCA 24V511T 24"... | 173 views | 0 helpful votes


Resolder IC301=TDA8177 mounted on a heat sink. This integrated circuit has 7 pins.

RCA 24V511T 24"... | 59 views | 1 helpful votes


Hi. Look for cold solderjoints on the vertical output section. Most likely, the vertical final IC has bad solderings. Using a magnifier, one can see "craters" around the soldering pin/pad. Or just simply re-do all of them. Good luck;

RCA 24V511T 24"... | 54 views | 1 helpful votes


If the tuner is weak, this kind of fault can occur. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter".
http://electronicshelponline.blogspot.com/

RCA 24V511T 24"... | 23 views | 0 helpful votes


Check and replace damaged component/s at its main power regulator [SMPS] board's start voltage section.
Gopakumar Gopalan Google

RCA 24V511T 24"... | 31 views | 0 helpful votes


What happened to this button? Provide more details, please. Gopakumar Gopalan Google

RCA 24V511T 24"... | 24 views | 0 helpful votes


TV has to have an ATSC tuner. Should find it in onscreen menu. Otherwise, you will need a converter box. About $50 at big box stores.

RCA 24V511T 24"... | 46 views | 1 helpful votes


Digital. I've had the same problem ever since everything went do digital.

RCA 24V511T 24"... | 21 views | 0 helpful votes


From the main menu choose "Parental Controls;" it's option six.

Choose the first option, V-Chip TV Rating Limit, and using the arrow keys and the OK button on the remote, scroll through until the TV-MA rating appears. Press the right arrow button to move the highlight over to the "Status" field and toggle to "View." Press the OK button. This will set the age-based ratings to Mature.

From the Parental Controls menu, select the second option, V-Chip Movie Ratings Limit and change the rating to TV_MA and the "Status" to "View."

From the Parental Controls menu select the third option, V-Chip Unrated Program Block and select item one, which will be "View."

Select the fourth option, which is "Channel Block." Highlight the Channel field and using the channel up and down buttons, go through and check they are all set to 'View." Any set to "Block" will need to be toggled back to View.

Lock the controls to activate the changes using item six on the "Parental Controls" menu.

RCA 24V511T 24"... | 112 views | 0 helpful votes


Turn on the TV and grab the remote. In most cases, you will need the original remote to unlock the TV if you aren't sure of the unlock code. If you don't have the original remote, you will need to purchase one.

Look at the screen. If you see a blank screen with a red key on the bottom of the screen, press 'Function' and 'Mute' at the same time. This should unlock the channel. This is an option for people who want the TV to stay locked but, want to be able to bypass the lock to watch a certain show or channel. All other channels will remain locked and the TV will fully lock when it is turned off.

Unlock all of the channels on the TV by entering the factory reset code. There are three main reset codes that TV manufacturers set. These are 0711, 6688 and 3308. Try each one until you find the one that works. This will reset the TV to original factory settings. When you do this, you will loose any information that you have stored in the TV, such as favorite channels, automatic timers and the clock. You will have to go through the full initial set up.

Call the technical support service number in your owner's manual if none of those codes work. A technician can help you troubleshoot the television because the problem may not be the locking control. When you call, make sure that you have the model number and serial number of the TV.
Take your television to a TV repair shop. In some cases, a professional who access to wiring diagrams for your television set may have to rewire certain components in order for the television to unlock. This is usually the case when the TV locks by itself while it is on

RCA 24V511T 24"... | 139 views | 0 helpful votes


From the main menu choose "Parental Controls;" it's option six.

Choose the first option, V-Chip TV Rating Limit, and using the arrow keys and the OK button on the remote, scroll through until the TV-MA rating appears. Press the right arrow button to move the highlight over to the "Status" field and toggle to "View." Press the OK button. This will set the age-based ratings to Mature.

From the Parental Controls menu, select the second option, V-Chip Movie Ratings Limit and change the rating to TV_MA and the "Status" to "View."

From the Parental Controls menu select the third option, V-Chip Unrated Program Block and select item one, which will be "View."

Select the fourth option, which is "Channel Block." Highlight the Channel field and using the channel up and down buttons, go through and check they are all set to 'View." Any set to "Block" will need to be toggled back to View.
Lock the controls to activate the changes using item six on the "Parental Controls" menu

RCA 24V511T 24"... | 92 views | 0 helpful votes


Hello
This CRT based tV is an anlogue one. You can use a universal remote control, except to unlock the FPA lock to this TV. By anyway, this TV has been locked with FPA lock, you must have its original remote control to unlock the lock. You can use most of the RCA universal remote controls with this TV.
RCA RCR 311W will be better. The setup codes are:
1000, 1002, 1004, 1005, 1014, 1025, 1078, 1081, 1095, 1096, 1097, 1098, 1099, 1100, 1101, 1111, 1128, 1130, 1132, 1134, 1144, 1146, 1149, 1171, 1205
OK.

RCA 24V511T 24"... | 273 views | 0 helpful votes


Hello
To unlock the FPA lock, you must have its original remote control handset. If you haven't it now, just buy ome from the authorised service center for RCA at your town, or just borrow it from andy of your friends or relatives who owns the smae model TV.
To unlock try the folloing methods. One amoung them will surley unlock your tv.

Most RCA TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.
  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.
OK.

RCA 24V511T 24"... | 195 views | 0 helpful votes


Hello,
First of all, make sure all components are powered up and plugged in. Next, check that your tv is set to the correct input by pressing tv/video or input button on either the front of your tv or at your remote. Scroll through the inputs by continuously pressing the input button until the see the roku video displayed on your tv.
Good Luck

RCA 24V511T 24"... | 363 views | 2 helpful votes


Usually with the power button, maybe if you try pressing the fda button again?

RCA 24V511T 24"... | 270 views | 0 helpful votes


if the tv is like mine without a power button on the tv try a universal remote or order a new one from rca.

RCA 24V511T 24"... | 86 views | 0 helpful votes


I have an RCA F27676BC, I'm trying to program a MOXI remote to it. RT-MOXI-8X The manual has about 30 codes to try, but the remote will only turn the TV off and on, not mute, or change volumn, Suggestions?

RCA 24V511T 24"... | 321 views | 0 helpful votes


dip switch is mainly located in computer mother board and ic circuit of tv

RCA 24V511T 24"... | 140 views | 0 helpful votes


FPA Lock On and have no remote for the TV on a RCA TV

RCA 24V511T 24"... | 1,554 views | 5 helpful votes


USE REMOTE IN MENU TURN FPA LOCK OFF

RCA 24V511T 24"... | 427 views | 0 helpful votes

Not finding what you are looking for?
RCA 24V511T 24" TV Logo

Popular Tags

56 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

only bottom half screen showing

  • Televison & Video
Loading...