Samsung HPN5039 50 in. Plasma HDTV - Answered Questions & Fixed issues

0helpful
1answer

Samsung LE37R88BD

How is it with standard channels ie terrestrial do you get a good pics or try to connect separate dvd player to find out if the pics are ok there need to find out if the sky receiver is faulty or not need all these information before advicing you await your answer
11/17/2017 7:12:38 PM • Samsung HPN5039... • Answered on Nov 17, 2017 • 100 views
0helpful
1answer

Lg flatscreen 07 green light flassing wont turn on

Need the model number sounds like power supply possibly bad caps. But need the actual model number to assist further.
12/9/2012 6:14:16 PM • Samsung HPN5039... • Answered on Dec 09, 2012 • 57 views
0helpful
2answers

Samsung 50 inch hpn5039 no picture but good sound

It sounds like the backlight is burned out. Its a long skinny tube that runs along the bottom of the screen that provides the light for the picture. Its actually not too hard to replace if you are somewhat mechanically inclined. Its just a plug or two and a bunch of screws. good luck
8/1/2011 5:21:44 AM • Samsung HPN5039... • Answered on Aug 01, 2011 • 198 views
0helpful
7answers

Plasma went black. Power not interrupted.

Vladislav fixed his TV already by replacing some defective capacitors in the power supply.
The locations of the defective capacitors are C523 and C524. The value is 0.22uF/400VDC or can use 0.22uF/600VDC Polyester coated.
Good Luck.
10/24/2013 12:59:09 AM • Samsung HPN5039... • Answered on Oct 24, 2013 • 1,161 views
0helpful
1answer

Our Samsung HPN5039x Plasma TV

Hello, It sounds like you have a defective power supply. Typically, +5 volt stby is present if the TV switches on with front indicator light. On the power supply, connector 802 pin 4 is the on command from the pcb main to switch the p.supply on. If this signal is present but still no VS,VA,VE panel voltages are missing, the p. supply is bad. Good luck!

Bill W.
integrityhomeworx.com
3/9/2011 2:56:38 PM • Samsung HPN5039... • Answered on Mar 09, 2011 • 345 views
0helpful
1answer

If I have to replace the Zboard LI4101199A what

if you are replacing the X-Sustain / Z-Sustain Board yourself,
the part is 179.95 + 10-15 s/h

http://www.discount-merchant.com/SAMSUNG-LJ41-01199A-X-Sustain-Z-Sustain-Board-p/1022934.htm

if you are taking it to a shop for repair, it is easily going to be double that.
10/7/2010 3:29:42 PM • Samsung HPN5039... • Answered on Oct 07, 2010 • 943 views
0helpful
1answer

My plasma TV (Samsung HPN5039) goes to a black

Take the PS3 signal out of the component cables source selector use it with a HDMI cable input put it on it on HDMI port should solved this problems.
6/17/2010 9:03:46 PM • Samsung HPN5039... • Answered on Jun 17, 2010 • 544 views
0helpful
1answer

Samsung hpn5039 worked for 6 years, now VERY dim.

The back plane lamps, and or the power lamp power supplies are failing. When considering 6 years of use, most likely both the lamps and the lamp supplies much be changed.
In many of these sets the back plane lamps are not replaceable. You will have to call the service rep in your area to find out if your set is serviceable.
From experience with these sets, after about 2 to 3 years proprietary parts become very difficult to have.
Jerry G.
1/19/2010 4:17:30 AM • Samsung HPN5039... • Answered on Jan 19, 2010 • 295 views
0helpful
1answer

When truning tv on, the screen is mute & green

Ur Main signal tuner board is deffective,must replaced get this problems solved.
1/13/2010 1:29:42 AM • Samsung HPN5039... • Answered on Jan 13, 2010 • 159 views
0helpful
1answer

I bought a samsung 50

The power supply for the pixel voltages has failed.
You can have a Samsung dealer replace it for you.
12/30/2009 6:12:28 PM • Samsung HPN5039... • Answered on Dec 30, 2009 • 274 views
0helpful
1answer

Picture no sound

If it has an rca jack at the back that say audio out, try connecting that to a recievers input. If the sound plays on your reciever that means the sound processor inside works, at least at the small signal level.
11/25/2009 7:23:16 AM • Samsung HPN5039... • Answered on Nov 25, 2009 • 130 views
0helpful
1answer

Samsung Plasma 52 inch flatscreen vintage 2004 - black line

Hi my name is Roety,
I can help you with your issue ,
If the line is present on all inputs, and effects the TV menu you most likely need a new screen.
You can try changing buffers, reseating cables. 
 
 
If I have helped you with your issue please click accept.
If you have more questions you can still respond until this post expires,
I will reply asap
Thanks I’m happy to help further over the phone at https://www.6ya.com/expert/eric_ab7c09ec01841771
11/9/2009 6:40:51 PM • Samsung HPN5039... • Answered on Nov 09, 2009 • 523 views
0helpful
1answer

Green flashing power indicator light

similar problem with my Sony. Unplugging for 36 hours solved the problem for me
8/31/2009 12:15:17 PM • Samsung HPN5039... • Answered on Aug 31, 2009 • 432 views
0helpful
3answers

Got a blue vertical line on me plasma

I had the same problem, a vertical blue line from top to bottom on my samsung TV.

Try this download this http://www.jscreenfix.com/video.php i burned it to a dvd and it fixed it within a minute.
8/22/2009 9:09:31 PM • Samsung HPN5039... • Answered on Aug 22, 2009 • 4,192 views
0helpful
1answer

No tv picture

my less than 2 yrs. old hardly used Samsung plasma is turning off automatically for no reason within 10m minutes of watching. What could be the problem??????????
3/3/2017 10:04:21 PM • Samsung HPN5039... • Answered on Mar 03, 2017 • 459 views
0helpful
1answer

Samsung HPN5039 Plazma

check the orange capacitor C526 and C524...
6/5/2009 2:38:38 PM • Samsung HPN5039... • Answered on Jun 05, 2009 • 575 views
0helpful
1answer

Purple blotch on screen

hi..This patch can be a result of your TV 's Auto Degaussing
Coil problem. Metallic parts of a TV gets magnetized and the
ADG coil demagnetizes them. At power on you should hear a
sound,which is the ADG coil.please check the ADG coil connector
it might have been pulled out. The ADG coil is wrapped around securely
on your TV's Picture tube and power is tapped directly from the AC
Main via a plug in type connector to the TV main circuit board.
check it out..
thank u..
rate me..
5/4/2009 2:48:16 PM • Samsung HPN5039... • Answered on May 04, 2009 • 917 views
0helpful
1answer

I have a samaung hpn5039

could be in the auto upgrade turn auto upgrade off you might have to unplug power plug plug back in if picture appears go to menu turn auto upgrade off
3/11/2009 10:46:53 PM • Samsung HPN5039... • Answered on Mar 11, 2009 • 195 views
0helpful
1answer

I have a Samsung plasma hpn5039, and i was

Two things,
1st -- power board problem
2nd -- Y- Main Board problem

If you are familiar with TV,
Open the back panel first then check the fuse on power & Y-main
Board.
It had problem that the board's which disconnected fuse on.
2/24/2009 6:52:29 AM • Samsung HPN5039... • Answered on Feb 24, 2009 • 232 views
0helpful
1answer

Redish hue

Sounds like a bad backlight bulb. I am sure it will not be that easy to replace.
11/17/2008 5:00:20 AM • Samsung HPN5039... • Answered on Nov 17, 2008 • 103 views
Not finding what you are looking for?
Samsung HPN5039 50 in. Plasma HDTV Logo

Popular Tags

51 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...