20 Most Recent Linksys Wireless Dual Band Anywhere EA6400 - Page 6 Questions & Answers

You will need to reset the device.

by default it uses the most strong signal to connect. You can change connections manually - no exact steps since have no idea what system you're running on

The manual, here : https://www.timewarnercable.com/content/dam/residential/pdfs/support/WirelessRouters/linksys_wrt54g_ug.pdf gives on page 20 this:

for securing your linksys router, first you need to connect your linksys router with computer via cable. then you need to open router setup page on your browser. Once you will be there , you need to click on wireless security. now you need to select your wireless protocol and type your password in. Finally you need to click on save settings and your password will be setup . you can enjoy with it. Thanks,

Using web browser enter the default ip of the linksys device. Make sure a port on the router is connected to your PC. Also ensure you configure the PC is on same subnet as your router. Login with the default credentials. This should take you to the router interface where you can set up SSID and security for your WIFI

Linksys 2.4G What? what model?

You are not entering the correct router WPA/WPA2?PSK password.

abracadabra a model number would take the use of magic out of the solution. How have you hooked up this device is it working with an existing modem router ? Is the router an adsl router as well as wireless. What is the IP address of the router ? Are there two dchp servers on your network ?

Sure you can if your router has multiple ports (Ethernet). So let say you need a connection in the 2nd level then buy the length of cable and connect teach end to the PC and the modem. Another option is to buy a WiFi extender. Here are some samples: WiFi Range Extenders

Normally, you will use 192.168.1.1 and access the configuration screen from there. If you can provide the model number, perhaps we can focus the answer.

Try: http://help.yahoo.com

Go to this page and find what u need : http://support.linksys.com/en-us/support/adapters/WUSB54GSC

Unplug the power cable from it for 15 seconds and plug it back in. That's what I do instead of just turning it off, and it works for me in any case.

to set up port forwarding....go to the Application and gaming tabs which you will find in the router website link.

Http://192.168.0.1 enter that address to your web browser. Default password should be password , user name admin.. log in andchange it there at that address. Make sure your on a, wired connection to the router.

There should be a button on the bottom of the router labeled 'reset' push it in and the router will reset to factory settings. ( dhcp is usually enabled by default) the lights for network activity should blink for a few seconds as the router gets a new ip from the network. you should then be able to go to 192.168.1.1 and access the router. some motorola routers use an address in the 10.x.x.x range

To get to your routers backweb to change settings type one of these URLs. 192.168.1.1 or 192.168.2.1 should bring up a small screen. User-admin password should be linksys if not go to their website for the user password but those are the standard defaults. You can reset the router to factory default as well depressing the reset button for 30 seconds.

if this is the first time setup, then you would consult the docs that came with it for the 'default' password. If not, then you can log-in to the Router, (which requires yet another password...) and look at it, or at the least allow you to change it to something else.

Sir I suggest you go to below link URL website for your Linksys Router connection check,if you connection is not set up the perform the step mention on Below URL link Below Website: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=b90128e4c5e547cc81cdcd13d42f1fc7_4755.xml Or Before following the steps in this article, check if your wireless computers have stable connection when connected to other wireless networks (hotspots). Frequent wireless disconnection can be caused by different factors such as: i. Wireless interference within the network. ii. Wireless settings of the Linksys gateway are still set to default. iii. Firmware is corrupted. Reducing Wireless Interference If you are experiencing frequent disconnection from the wireless network, it will help if you check the following factors, all of which can greatly affect your wireless signals: 2.4 GHz interference: Your gateway may be operating on the same frequency as your cordless telephone system (or even your neighbors'), or other nearby equipment. Try to change your gateway's channel to 1 or 11 (the default channel is 6) and restart the wireless computers. Physical obstructions: Your gateway or wireless computers may be losing connectivity because of physical obstacles such as walls and floors. Try to move the equipment to different locations to find a better link. Placement of the gateway: Linksys suggests that you place your gateway as high off the ground as possible. When placing the gateway in a high location, leave a distance of two feet between the gateway antenna tips, ceiling, and wall. If your signal passes through multiple floors, place the gateway on the upper-most floor, and high up in the room. Surroundings: Keep the gateway away from large metal objects, bodies of water (fish tanks, bathrooms), and any electrical equipment including television sets, microwaves, radios, etc. Or In case you Still need Linksys online support assistance then follow us on for Linksys Router Support

Please Define Unstable!