Rangemaster Elan 90 (Dual Fuel) Dual Fuel (Electric and Gas) Kitchen Range - Answered Questions & Fixed issues

it,s on the back of your oven on the left hand side looking at it from the back there,s a large silver sticker with different country,s name,s and a small silver sticker just below it with the make and model number on it hope this help for you '

Sorry to read about your problem, I hope this helps you out.
you have a stuck control switch

I tried to help you. Please help me and Rate/Vote on my response, thanks and good luck

good day,
hope this link below will solve your problem.

ovens

The relay in the main control is fried. You will need a new main control board, the relays cant be replaced separately. If you take out the control you will probally see the burnt relay

we had the same problem - a power cut then the clock flashed up 'auto' preventing the oven from working.
After downloading the manual from the rangemaster website we learnt that all you need to do (for the classic dual fuel anyway) is to press in the 2 buttons on the left and set the time using the + or - keys. Dead easy and Christmas dinner is back on!

I had a similar problem with my Rangemaster Toledo 110. The glass cover would move slightly but would stop as if being held by something. I went to the Rangemaster website and the checked the users manual which suggested it was a simple operation of turning anticlockwise. Eventually I got a pair of vice grips and opened them to their widest and clamped them round the glass. The slightest of pressure and the glass moved past the stop point and off!! I've replaced the bulb and put the glass back on only hand tight and in anticipation I've loosened the glass cover in the other oven - just in case!

Your electronic oven control (clock) has failed. This being a new appliance, it will be covered under warranty. Call the dealer and ask for the manufacturers warranty/customer service phone number or ask if the dealer provides warranty service. You will need to provide them with the Model and Serial number to obtain service, so have this ready when you call. After service is complete, please connect your oven to a quality surge suppression/arrestor device. We recommend these... http://catalog.belkin.com/IWCatProductPage.process?Product_Id=124911 , they can be found here... http://www.belkin.com/wheretobuy/show.aspx?pid=&targ=19&ttr=3e86a31d-23dd-4b8d-acbf-2adf1ce9ecc0&cid=1

I presume it is gas powered? They are available in all sorts of dual fuel variations. When you operate one element all the igniters spark. It sound like the igniter switch for the oven need adjusting. They normally operate on a cam so when you turn the control knob, the cam lobe runs up onto the micro-switch and then off it again creating a ignition spark on the way. It is a gas appliance, so call for service. Various other suggestions here https://www.google.com/search?q=Rangemaster+Professional%2B+oven+igniter+keeps+clicking ..

Remove the flame spreaders and rings from the 3 rings you use the most, including the faulty one. Put them in a large pan cold water, add a teaspoon of dish liquid and slowly bring to a simmer. As soon as it want to boil over, blow on it and turn the heat off. Leave it to cool. Scrub with a plastic pot brush making particular attention to the holes. You had a blocked one which is the one that directs the gas to the spark igniter. Rinse and dry them, and replace to the hobs.

Video help

The thermocouple needs replacing. That is what tells the main gas valve to open when you turn the knob.

Video help here, just in case you never managed it back in November 2018 :>D

Question edited for clarity and spelling of Model Range 'Tecnik' with a 'c'. Just lay it back over. Its purpose is the stop the back panel getting hot and to keep heat in the oven cavity. https://www.fixya.com/support/t779759-tecnik_tkc_1285_access_fan_element and https://www.google.com/search?q=tecnik+tkc1285+replace+oven+insulation Same for any oven make ..

Ands like a thermostat or thermal fuse issue.

possible control board

check and test thermocouple

If the LPG cylinders have the correct pressure regulator, no need to use an extra one but any regulator must be set to the correct pressure or removed.

Faulty thermocouple, suggest you get it replaced.

Its the spark box repeating check the elcrtode is not damaged /cracked . if not it sound slike a faulty box