20 Most Recent Xerox WorkCentre M118 PCL 6 - Page 7 Questions & Answers

Lillianrod1

If the Webcam does not include a CD, the drivers (the software that runs the webcam) should install itself automatically when you plug in the drive. If you are on windows, make sure you have Windows Update enabled so that it can search for the right drivers.

To start using it in Skype, simply open skype, go into the Preferences, and set the webcam as your camera video chatting. To take pictures, you will need software to control the webcam. http://www.yawcam.com/ is a free webcam software that will let you take pictures with your new webcam.

i ma using xerox phaser 3121 printer. printer is vey nice but due to usage its tray got destroyed and sometimes it dont work too so i want any service centre's no. pls any1 help

This is most likely a refresh rate issue.

Reboot your computer and hit F8 before windows starts to load safe mode.

In safe mode, go to control panel, display and then settings.
Change you monitor refresh rate to 60Hz and reboot.

Depending on your windows version it may be under advanced in settings.


If this doesn't help it may be a hardware issue.

just go look it up on google and should tell you how you can solve this problem, some thing like ( how to fix error code E507-0000 for a ir 3300 copier) in the search bar and should bring up many solutions for ya to try. the fixist good luck and have a nice day

How to format your hard drive and re install your operating system.
in order for you to do this you have to (before you format)
1. make sure that you have your recovery cd's or a cd/DVD with your operating system (windows or Mac)
2. try to back up all your information to an external Hard drive or DVD's depends on how much usable information you may have.
3. try to handpic your files to back up because if you do an auto back up you will end up with the same problem again.
-- to do a back up copy all your needed files to an empty folder and then burn them to DVD's or copy to an ext. HD.
4. after you do that (if you have your recovery cd's) insert #1 and restart your computer it will tell you to press any key to start from cd do that and follow directions.
5. when the program shows your partitions go ahead and delete them all, you need to end up with one
6. when you see just one partition go ahead and click continue and it will install your new operating system
7. if you have more than 1 cd it will ask you to insert the next one and so on.
8 after it finishes installing, get the cd out and run the setup process like if you've got a brand new computer, type the information and keep clicking next.
9. at one point you would be on the windows screen and that is it you have a brand new operating system.
Note: take in consideration that when you follow this process, you
erase EVERYTHING from the system including files and programs so after you do this you are going to have to re-install all your programs and copy your docs. back to the pc.
**** If you don't have the discs
check under start-(all) programs - start up- recovery- disk creation.
that (if you have it) will help you to create your recovery disks try to use 2 dvd's if posible if not you may have to get a windows cd to re- install and install drivers and apps.

if it works for you don't forget to rate me

thx

check you resolution settings for the monitor. It may be set to high.

Google it

ion_prisecar, There might also be some Hidden screws ??? It's only a guess!! If not then watch some video clips at YOUTUBEunder "lcd monitor disassembly" and or "lcd monitor repair". Try to find clip that might be useful for you. "PARTING" the rear cover from unit's front BEZEL is the hardest dam thing to do!!!! 12fixlouie

Switching itself OFF to me it means even the LED light at the front goes OFF. If that's the case, you may have a hardware problem. However, if the LED changes color, chances are your monitor is gone to "sleep mode" in order to save you money on energy. If the latter is the case, simply moving the mouse of pressing any key on your keyboard brings the display back. Try that.
Energy saving is controlled by your Operating System, Windows or Mac. Look in the Control Panel for Power Management or similar category. In Windows, these settings can be found and are related to Screen Saver. Look there first.
Good luck!

Hi

here's lots of place online to buy parts. LCDparts.net is good. How are you sure that it's the inverter? The inverter is the most difficult part to troubleshoot because most shops (not mine) they don't have the high voltage equipment needed to test the inverter. Generally this type of error is actually power supply related. Usually bad capacitors but can also be other components. My shop repairs these all the time. Maybe you can find someone locally?

Try turning it around. If it still doesn't fit, you may need a DVI to VGA adapter.

Does the same thing occur with a different document.. Because it is not repetative, it leads me to believe the line is being drawn at the direction of the software. Try printing a test page, and see if the line appears. If not the issue is from within the word processsing software. It almost sounds like a legal template for a pleading..

Solution: Send a Secure Print Job From a Workstation Make Printable E-mail this page

1. With your document open in the application, click on [File] on the toolbar and then select [Print] from the menu. The Print window will be displayed.
2. Select the printer in the Name field.
3. Click on the [Properties] button.
4. Click on the [Paper / Output] tab.
5. Select [Secure Print] from the Job Type pull-down menu.
6. Click on the [Setup] button (just below the Job Type menu) and enter a 4 to 10-digit code, to release the job at the printer, in the Enter a 4-10 Digit Secure Print Passcode field.
7. Enter the code again in the Confirm 4-10 Digit Secure Print Passcode field, and then click [OK].
8. Make any other required selections in the print driver and the click [OK] twice to send the job to the printer.

Solution: Enable Release All for Secure Print Make Printable E-mail this page NOTE: This solution assumes Microsoft Internet Explorer is being used as the web browser. Other web browsers may vary. You may need to contact your System Administrator to perform this solution as it requires knowledge of the network’s Authentication environment.
The WorkCentre Pro will have to be configured for TCP/IP (IP Address, Subnet Mask, Broadcast Address, Gateway Address).Before you begin, print a Configuration Report and make sure the WorkCentre Pro has an IP address, and the HTTP protocol enabled. See the Related Items below.
From the workstation:

1. Click on [Start], point to [Programs], and select [Internet Explorer] to open an Internet Explorer browser window.
2. Enter the IP Address for the WorkCentre Pro followed by /diagnostics/secureReleaseAll.dhtml in the Address field, and then press [Enter] on the keyboard. For example, type: xx.xxx.xxx.xx/diagnostics/secureReleaseAll.dhtml (where x represents the IP Address). A Secure Print Release All window will be displayed.
   
   NOTE: The URL is case sensitive; secureReleaseAll must contain a capital R and capital A.
   
   
3. When prompted, enter the username and password in the fields provided.
   
   NOTE: The default username is admin and is case senstive. The default password is 1111.
   
   
4. Click on the check box next to [Enable release of all secure print jobs with the same user name and passcode] to insert a check mark.
5. Click on [Apply].
6. Click on the [X] in the upper, right corner to close the browser window.

Please follow this link
http://www.support.xerox.com/go/results.asp?Xlang=en_US&XCntry=USA&prodID=6130&ripId=&Xtype=download

if your OS is not XP then change your OS choice from top menu
Hope it helps ...Good Luck !!!

Sounds like your tray guide is not butting up againat the edge of the paper.

Keep a backup on your hard drive or a backup. The backup system is a free service supplied by your internet provider. If you use it daily or after every update, there will never be an issue.