If your device does not respond to the
remote control after trying all codes
listed for your brand, or if your brand is
not listed at all, try searching for your
code. For example, to search for a code
for your TV:
1. On the remote control, press
TV once.
2. Press and hold
SETUP until the LED
blinks twice, then release
SETUP.
3. Enter
9 -
9 -
1.The LED will
blink twice.
4. Aim the remote control at the the
TV and slowly alternate between
pressing
POWER and
TV. Stop when
the TV turns off.
NOTE: In the search mode, the remote
control will send IR codes from its library
to the selected device, starting with the
most popular code first.
5. To lock in the code, press and hold
SETUP until the LED blinks twice,
then release
SETUP.
6. To search for the codes of your other
devices, repeat steps 1 through 5, but
substitute the appropriate device key
for the device you are searching for
f you have set up the remote control
using the
Searching For Your Code
procedure, you may need to find out
which four-digit code is operating your
equipment:
For example, to find out which code is
operating your TV:
1. On the remote control, press
TV once.
2. Press and hold
SETUP until the LED
blinks twice, then release
SETUP.
3. Enter
9 -
9 -
0.The LED will
blink twice.
4. To view the code for the first digit,
press
1 once.Wait 3 seconds, count
the LED blinks (e.g., 3 blinks = 3)
and write down the number.
NOTE: If a code digit is “0”, the LED will
not blink.
5. Repeat step 4 three more times for
remaining digits.Use
2 for the
second digit,
3 for the third digit,
and
4 for the fourth digit.
6. To check for codes of other devices,
repeat steps 1 through 5, but substitute
the appropriate device key for
each device you are checking.
As before,write down each fourdigit
code.
http://www.rockabilly.net/files/manuals/URC-3605.pdf is my source for the info
http://www.rockabilly.net/files/manuals/URC-3605-codes.pdf these are the codes, I didn't see insinia in the TV section, so you may have to use the search feature