20 Most Recent Samsung Bd-E8900 3D Smart Blu-Ray Disc Player Questions & Answers

I try to get netflix and receive a message stating network interference try again later.what;s causing this?

You're TV is not linked to the internet.
You need to pair up your blue tooth to the wi-fi or
make sure your ethernet cable is connected or needs replacing.

Samsung Bd-E8900... | Answered on Apr 15, 2015

Tip

SOFTWARE UPGRADE AND POWER SUPPLY CIRCUIT

Software Update
The Software Upgrade menu allows you to upgrade the player's software for performance improvements or additional
services.
• Never turn the player off or back on manually during the update process.
1) In the Home menu, select the Settings, and then press the ENTER button.
2) Select Support, and then press the ENTER button.
3) Select Software Upgrade, and then press the ENTER button.
4) Select one of the following methods:
• By Online
• By Channel
• By USB
• By Disc
• By Downoaded
• Standby Mode Upgrade
5) Press the ENTER button.

FOR MORE CHECK THE FOLLOWING LINK

Electronics Equipment Repair Center

on Feb 14, 2015 | Samsung Bd-E8900 3D Smart Blu-Ray...

0 Answers

My samsung 65 7150 seemed to have a bad main board. So I ordered a used one and replaced it. Now the LED lights up but niether there is a picture nor does the button work any more...

Probably the used replacement board is defective.

Samsung... | Answered 28 minutes ago

1 Answer

My samsung ln55b640r3fxza hdmi ports say no signal how do I fix this

go into input or source make sure HDMI is connected to source make sure plugged into a in port

Samsung... | Answered 17 hours ago

1 Answer

My Samsung tv keeps flashing smarttv and it won’t progress beyond that.

try changing input or source

Samsung... | Answered 17 hours ago

1 Answer

Have a Samsung UN60H6203AFXZA TV with no picture. There is sound, backlights are not on, can see the screen with a flashlight. Assume LED driver is bad. Driver on mainboard or the power supply board?

Here is a question that we see often.
Question: I've replaced everything in my television because it previously had a black screen with no lighting. Now it doesn't turn on at all and all I have is audio. What could be the cause ?
So your television stops working properly and you think it must be easy to fix, because you can buy boards on eBay, and you can watch YouTube videos. So you make a decision, you buy a board and you fit it, but the television still doesn't work! This is a classic case of the 'let's try replacing this' method of television repair and illustrates why it is a bad idea. It doesn't work for a number of reasons. To correctly diagnose issues, you need to know every board, what is does and every component on the board. You need to know which part has failed, replace the component, or replace the board. The parts you purchased off eBay were probably out of scrapped sets and not tested. The part your put in was dead when you put it in, so you just moved on to another guess at what might be the cause and replace a board that is fine. And so it goes on, you change all the boards and it still doesn't work. Did you notice the large print that says 'No Refunds, NO Returns'. This is to stop you sending your old one back and saying it didn't work, but the unscrupulous use it as an excuse to get money for selling items that may not work! The course to be a television engineer is 2 years full time education, take it to someone that knows how to diagnose and fix. It is by far the cheapest option. The part that failed might be a 20 cents fuse diode hard soldered to a board. They will charge you $2 parts and an hours labour.

Samsung... | Answered 23 hours ago

1 Answer

I have an activation code on my screen on my 55” Samsung smart tv. Says self-care portal but I can not find that?

https://www.reference.com/world-view/samsung-activation-codes-9f41415f6e6f9413

https://www.samsung.com/au/support/mobile-devices/how-to-create-a-samsung-account/

https://www.wikihow.com/Register-Your-Samsung-Smart-TV

Samsung... | Answered Yesterday

1 Answer

When i turn on samsung dvd cinema, protection appears, and a red led flashes

You will have to find out what is causing the equipment to be in protect mode, then fix it to restore normal operation.

Samsung... | Answered Yesterday

1 Answer

Samsung UN55J6201AFXZA LED TV has no visible display. Replaced boards to no avail.

Only a service-manual and soldering tools in this case can give results how are the fpc connectors and circuits connected to the screen also a little repair suggestion = to see here much problems caused by wet cleaning the screen and sometimes build-up heat by sun rays or bad airiation.

Samsung... | Answered 2 days ago

1 Answer

Samsung LED tv has a blank vertical space.

Get an LG.. went through TOO many Samsungs.!!

Samsung... | Answered 2 days ago

1 Answer

My Samsung TV keeps beeping about every 30 secs even if unplugged

That's impossible unless is it possessed by the devil. If it is unplugged, there is no power to it. It has no internal battery apart from a tiny one on the motherboard to keep its memory. It is more likely to be a carbon monoxide alarm or similar. See the link.

https://www.google.com/search?q=Samsung+TV+keeps+beeping+about+every+30+secs

Samsung... | Answered 2 days ago

1 Answer