20 Most Recent
Tissot T-Touch T33759851 - Page 4 Questions & Answers
Need to sync tissot t-touch
Paste this link into your browser:
http://www.t-touch.com/flash.html
1)Close available countries window,
2)Click on T-Touch, then choose Stainless Steel,
3)On the right side of the window click on film tab,
4)In the left box in the window find all the functions
5)Watch and listen to instructions
6)Smile
Do not forget to rate, please.
Adjusting meteo function
Yes, Sir. But remember when pilots reset their altimeter with the local altitude, the pressure value matches the moment wheather pressure. It will be wrong anyway, if you reset you altitude, but the pressure readings are still wrong. Im my case it is happening. The altutide is correct but the pressure of the watch does not match the local pressure. It is 20 hpa over it. By the way, I am an airline pilot.
Synchronizing digital time with analogue time
hi...
press the T button until the crystal is activated.
press the middle of the glass until the time format appears (24hb Cm appears)
hold the T button for 5secs (SYNCHro appears)
move the hands until they are at 12 o'clock. ( + button moves the minute hand. - button moves the hour hand)
press the T button to set.
digital and analogue time are synchronised
pol
BAtt flashing on digital screen although I only
Yes, the flashing battery icon tells you it's time to change the battery.
Despite of that the watches are fitted with brand new batteries when they are leaving manufacturer, there can be a significant period of time till they reach their new owners and the watch battery can be flat (or allmost flat) at the selling point.
I suggest you visit sellers shop again a.s.a.p. and ask for the brand new battery to be fitted under the warranty.
Rate me, please.
Bracelet
srevice center for tissot watches here in the philippines is only at timeline...g/f farmers plaza cubao,q.c. its fronting gateway and araneta coliseum.
Synchronizing
This is user-correctable.
See manual page 4, titled "Synchronization".
1. Press T button
2. touch center until you see the 24h/units
3. hold down T for 5 seconds until you see "Synchro" in the LCD.
4. use the + button to move the long hand to 12 o'clock, use the - button to move the short hand to 12 o'clock
6. press T button to commit settings.
Hands will move to agree with the time in LCD.
Changing to metric
1. Activate Crystal
2. Tap center until units screen appears (This will say either 12 or 24h and F ft or C
m)
3. Press and hold top + button until watch beeps, display will be flashing.
4. While flashing, press top + button which will change the C m to F ft and back
5. While flashing, press bottom – button which will change the 24h to 12h and back.
This will also change the date format. If in 24h the date will be Date/Month, if in
12h it will be Month/Date.
The stem that is used to change the time/date came off my watch.
Most likely, the watch needs to be taken to a watchmaker. Your local chain jewelry store will either have a local watchmaker or someone nearby contracted to perform service on watches. Unless the stem is somehow married to the movement in manufacture, replacing/repairing the stem should be an inexpensive fix.
I hope this helps. If it does, please rate the solution offered. My goal is always FixYa or Helpful, never TFT or IA. Regards,
Char1ieJ
Digital/analog times not same/# of batteries
You need to synchronize the watch. You can find directions to do that online, but you will likely have to do this several times a year. There are so many functions that you will occasionally need to go to synchro mode to synch everything up. It freaked me out the first time I saw this too. : )
Big problem
Push the touch button and then the centre of the screen untill the units deg C 24h etc come up then hold the touch button for 5 seconds. This puts it in sycro mode. You can then use the -+ buttons to make them both point to 12
Compass wont work correctly
if your hands aren't straight when you use the compass try this to sync the hands.
1. Press and hold the middle button to enter T-Touch mode.
2. Press the centre area on the face twice to display 24hr/12hr
3. Press and hold the middle button to enter T-Touch mode untill screen says sync.The hands will face 1200.
4. Press either the upper (East) or lower (West) button to adjust the compass hands. They should both face 1200.
5. Press the middle button to get back to 'regular' compass mode. Note that your offset setting will still show in the digital area.
Not finding what you are looking for?