Homelite Mighty Lite Lawn Trimmer  "pull start cord" Questions

pull out all at once to start. It worked fine then all of a sudden won't pull out all at once TRY OPENING COVER,REWIND BY HAND,WITH THE COVER OFF SLOWLY PULL CORD OUT,WATCH AND SEE IF THE PULL

...pull to start the trimmer the pull cord can only be pulled out so far and it seems to catch and won't pull enough to start the machine i had a problem like this on an old mower, the cord had ...

...pull cord..It wont rewind but I can hear it trying to start It sounds like you did not properly rewind the spring that is behind the spool that the cord would around, that spring is what rewinds the ...

...pull start clutch, remove the four screws that attach the pull cord mechanism to the motor, detach motor, remove the pull start clutch assembly, lubricate, clean and reinstall, You should be back to ...

...pull cord replace the starting pull cord Graeme, Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. Check out ...

start pull, holding the cord in the little cut-out so that the cord does not wind up as you wind the spring. It probably takes about 5 extra turns on the pulley to get the recoil tension right. Always

...pull the start cord 5 x the cord now pulls with no tension whatsoever I hear a spinning noise it looks like something is spinning up behind the trigger under the engine cover but the motor will not ...

...Pull/start cord only moves 1" when trying to start, could this be because of a bad (old) mix of gas and oil, or related to a loose throttle cable? it's doubtful that bad gas caused this, it ...

...start. No sound at all when cord is pulled. if it pulls super easy and it doesnt sound like the engine is even rotating when you pull it it is your pull cord assembly . basically its a giant ratchet ...

...start. I had to pull the cord multiple time & it started. After a while I had to switch it off & when I tried again it didn't start. The cord is taking much more force to pull & I even ...