Homelite Mighty Lite Lawn Trimmer  "ignition coil gap" Questions

How to Install a new ignition coil FS 38 What gap between rotating coils & ignition block ? a business card will work to get a workable gap but the exact distance is 0.15 - 0.45 mm

...ignition coil &plug but no spark Keith you have got to make sure the gap is right between the coil and the magnetic flywheel. Use a buisness card to set the gap and make sure the coil is on the right ...

FS 45 ignition coil to stator gap? Robert the easiest way to reset the gap is use a playing card. Stick this between the coil and screw up tight then remove the card and it should work.

...ignition module in and I need to know what the timing specifications are. there is no timing spec . the air gap is .010 to .012. or .254 mm to .305 mm.open the gap all the way up and tighten the ...

coil . there is a small difference in design but now have ignition. Engine still won't start. Make sure the air-gap between your used blower coil module and the magnets on the Echo's flywheel is about

...coil/ignition.Sand with light grit sand paper if nessesary. Make sure to reistall with the same gap between the two parts.note the gap at this point could also be wrong.Also check to see if the clip ...

...ignition coil on asthil 029 what is the clearence Coil should be held on the saw with 2 torx t27 size screws. These will resemble a star. Remove the 2 screws, lift out the coil. The small wire should ...

ignition control module (coil) controls this and the contact legs on it have to be gapped about .010-.012" from the magnets on the flywheel. This goes on under the front engine cover. First, check for

...ignition coil and the flywheel needs to be checked. Some disassembly is required to get to it as these parts are under the front engine cover. The air gap should be around .010" (or about the ...

ignition coil air gap gap setting If you have a new coil check for a gapping card in the part box.   Otherwise the gap is usually achieved with a business card thickness of paper!