Speed Queen AWS44NW Top Load Washer "build dispenser" Questions

...top of dispenser housing aroud holes to remove build up ..if problem is still there entire assembly will need to be removed and flushed thoroughly build up is blocking the holes over the dispenser ...

dispenser between washes. (The detergent and bleach compartments are fine). Fabric softner isn't good for machines, it causes a build up and eventally it can cause damages the machine. Try a hot water

...build-up inside of the dispenser. I would recommend to remove the dispenser and you can do that by pulling it all the way out and there is normally a tab on the left hand side to push down that will ...

...build up back pressure through the soap dispenser if the pipe/chute is clogged due to soap build-up being present. Check that the pipe/chute that conveys the soap and water to the drum is not

Dispenser assembly is covered with black sludge. The "black sludge" is a build up of algae and also washing powder and fabric softener. Remove the dispenser by pressing the small panel in the rear of ...

...dispenser tray to the tub are not clogged. Detergents and fabric softeners can build up inside the hoses and cause partial or complete clogs that will cause the dispenser trays to overflow and thus ...

...build up that you would have to clean out,something is wrong with the dispenser most likely.next time send the brand name and model number so whoever is helping you can look up your machine to help ...

...take the soap dispenser drawer out and clean the drawer and the underneath the drawer, then clean the inside of the machine where the drawer fits into to. It could be caused by a build up of

dispensers is not releasing detergent dishes are still dirty TAKE OUT THE DISPENSER TRAY AND CLEAN ANY BUILD UP OF DETERGENTS ALSO CLEAN OUT THE TRAY HOLDER .

...softener 'tubes'. The compartment uses capillary action to dispense the softener. If there is any build up, it will not