1991 Toyota Cressida "2nd 4th gear manual car" Questions

Ad

2nd and 3rd but wont go into 4th everything else is working perfect Joe there is a way to test the transmission control computer to see if any trouble codes are present> I will check my manuals and

Ad

...4th available; trans shifts 2nd to 3rd by itself in D or OD and locks the converter : ShiftA solenoid failed. Easy fix in the pan. Or a wiring problem from PCM to trans.. or PCM. Car goes into gear ...

Ad

...2nd gear. It slides over to 4th. So I have 1st, 3rd, 4th, and 5th. throw out bearing When I turn on my car the check engine light turned on and when I took off it didn't want to shift to second ...

...2nd, 3rd and 4th. I will not shift into 5th 2. I checked the transmission fluid using the dip stick and it is clean with no visual wear. What I did notice is that the fluid is over the hot line when ...

Question about Toyota Cressida

1 Answer

2nd 3dr 5th and reverse gone MT still have 4th gear but all the other gears slip manual transmission If 4th gear is good, no slipping, then your transmisson is toast. Replace with a known good working

...4th available; trans shifts 2nd to 3rd by itself in D or OD and locks the converter : Shift A solenoid failed. Easy fix in the pan. Or a wiring problem from PCM to trans.. or PCM.Check to see if your ...

...2nd 3rd reverse, no noise in forth but noise in 5th. maybe bearing??? It is a 5 speed manual transmission? If it is noisey in all gears except for 4th, then the problem is countershaft bearings. Most ...

...4th or TCC lockup available, Manual 2nd, 3rd and Reverse are only available gears, CEL is on: Transmision is either in limp-home mode or has lost electrical power. If there are lots of error codes in ...

...2nd gear and not shifting to 3rd, 4th etc. It does not downshift to 1st when the car comes to a stop. I can manually downshift to 1st, upshift to 2nd, but it will not shift manually to 3rd,and 4th. ...

2nd or 4th. Check the transmission computer Before trying to figure out if it is the computer etc.From a dead stop.try going though the shifts using your manual shift lever,run the gears through their

Not finding what you are looking for?
1991 Toyota Cressida Logo

102 questions posted

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...