...306, 1 was the alternator the other was just a fuse. had on a citreon zx, which is same as a 306 and this 1 was faulty ignition switch, try wiggle your key im sure this worked on zx, which confirmed ...
306 HDI has a terrible whining noise from the alternator end of the engine needs a bottom pully, my advice is to get a suzuki grand vitara pully as it is the same as a hdi pully only its solid not ...
...306 sedan. It worked on several occassions and then stopped. There is no light on the dashboard display. The engine turns over but it wont start. I have tried wiring from the battery direct to the ...
...306 estate just in front of the altenator, there is a 10mm bolt, tighten that and it will tighten the fan belt . these belts are quite tight, make sure the one you have is the correct length, ...
how to remove peugeot 306 cabriolet alternator double posted
how to remove alternator from 2002 peugeot 306 cabriolet? You have to unscrew bett tensioner, move it a bit and dismantle ancillary belt first. Then unscrew and remove alternator from the car.
how to remove alternator from 2002 peugeot 306 cabriolet? neg battery lug off. remove wires/cables. remove drive belt. remove 3 bolts. its off
How to fit alternator to Peugeot 306 hdi 2.0? 2000 reg diesel start by removing all plastic covers,wheel,inner fender lining,serpentine belt and tensioner and the headlight to gane access
...out.Do not ever spray belt dressing on the belt to quiet it,that stuff will cause you more grief than it's worth and it should not be on the market . alternator belt configuration Peugeot 306
306 hdi, on towing back home noticed no lights on dash, replaced ignition with one purchased on line. The keys supplied didn't have a transponder in them so cut the metal part of the key and fitted in
638 questions posted
Usually answered in minutes!
103 Questions
805 Questions
164 Questions
161 Questions