2000 Hyundai Elantra "fix high beams coming signaling" Questions

Question about Hyundai Elantra

1999 Hyundai Elantra - Occasionally (always at the

...High beam signal does not come on. Hyundae dealer just told me we could replace the multifunction switch ($467 parts/labor!) and maybe fix it. Ouch! that is correct, the multifunction switch on the ...

Question about Hyundai Elantra

2 Answers

HIGH BEAMS COMES ON WHEN USING TURN SIGNAL AND LOW BEAMS ARE ON

high beam switch/lever wear and loose contact over time. You may be able to see wires leading from switch into steering colum. Check for bad wires, if none you may have to replace switch which you can

Question about Hyundai Elantra

3 Answers

When I turn on my right turn signal, my high beams

...my high beams come on. Will replacing the switch fix this? If you have a multi-function dimmer/turn signal switch: YES it will correct the problem. When I turn on my right turn signal, my high ...

Question about Hyundai Elantra

1 Answer

All instrument panellights come on dont start

...but not all the way to engage the high beams turnsignal switch unit is faulty and needs to be replaced that will fix the brake lights. Dash problem i think will be a different problem. need more ...

Question about Saturn Cars & Trucks

1 Answer

1998 Saturn Sc2 coupe Only drivers side low beam comes on passenger side off it has no power High beams work How can I fix this?

...High beams work How can I fix this? Find the break in the power wire for the low side. High beam works, ground is good. Low beam works on the other side, so you have power threw the switch and turn ...

Question about Hyundai Elantra

1 Answer

I have a 1999 Buick Century, My low beams don't work at all. My cruise, signals, and wipers work. The high beams only work if I hold the switch towards the steering wheel. My parking lights co

...high beams only work if I hold the switch towards the steering wheel. My parking lights come on automatically and when I pull on the knob in the dash. I have no low beams at all whether I pull the ...

Question about Cars & Trucks

1 Answer

My low beams on my 2006 Madza 6 dose no come on but the high beams come on, why needs to be done to fix the problem?

My low beams on my 2006 Madza 6 dose no come on but the high beams come on, why needs to be done to fix the problem? These lights run threw the turn signal switch. Replace it.

Question about Chevrolet Cars & Trucks

2 Answers

I h ave a 84 Chevrolet Scottsdale low beams work fine when I turn on the high beams 1 low beam goes Dem lose driver side running lights and turn signals and one high beam comes on on the drivers side

high beams are on check dimmer switch, this is whatever you use to dim or put your lights to bright. Also check by fuse box for dimmer, if your switch is there, unplug and buy a new one,this is a much

Question about Hyundai Elantra

1 Answer

Headlights not working

...fix the problem. Ok Guys Thanks I will check into the dimer switch first, But if it is the turn signal switch assembly with the high beam control on it, it will not be cheap, I think they run about ...

Question about Hyundai Elantra

1 Answer

2003 envoy low beams will not work.fuses

...beams.only high beam relay. For the I6 engine there is a relay for low beams, it's relay # 46. Switch it with relay #45 (runs the fan, same model relay) and see if your lights now come on. These 2 ...