2000 Hyundai Elantra "clutch master cylinder bleeder screw" Questions

...for proper investigation. But if the bleeder screw is open and the pedal stlil can't press then the problem could be the clutch master cylinder, clogged up line or the clutch sleeve

...clutch master cylinder reservoir. CAUTION: DO NOT allow bleed line to bend or flex when loosening bleeder screw. FIG1: http://anubiscycle.com/fixya/91wranglerslaveassy.png The location is in the same ...

...clutch master cylinder. It will be located in the engine bay on the driver side of the firewall, near the brake master cylinder. Fill the reservoir with DOT 3 brake fluid. Do not allow the reservoir ...

...check on on master cylinder keep fluid level full.to keep air from being drawn through the master cylinder.never release a depress clutch pedal with bleeder screw open.or air will enter the

...clutch slave cylinder , make sure the master cylinder is full of brake fluid , close the bleeder screw have a helper pump the clutch pedal several times then hold it down, open the bleeder screw air ...

clutch master cylinder is full of brake fluid, have a helper pump the clutch pedal a few times and hold the pedal down, unscrew the clutch slave cylinder bleeder screw a few turns and release any air,

...clutch master cylinder was going and quoted me an outrageous price. I found one for $75 but I want to know what I should be looking out for. Are there lines that need to be bled, like with brake ...

...clutch cylinder with brake fluid open bleeder on slave cylinder let oil leak check the fluid in the master you should see bubble coming out after there only oil coming out close the bleeder ask ...

...clutch slave cylinder,it's bolted on to side of transmission,get a hose put on bleeder screw valve and other end in container and open bleeder screw and remove clutch master cylinder's containers

...same model as you have but most vehicles have the same components for the non electronic parts. ...