...bleed the clutch on a 2002 hyundai accent its the same process as bleeding brakes- except you pump the clutch pedal and loosen the clutch slave cylinder located by the front motor mount instead of a ...
Question about Hyundai Accent
you need to bleed the master cyl. first, then remove the pipe on top of slave, and bleed it till it spits out. eventually the clutch will be restored. I suggest you fit new master and slave kit first
bleed the slave cylinder on my 1998 hundai accent? the clutch still works, but i have to push it all the way to the floor If you have air in your system, the slave is probably leaking. Did you replace
...clutch fluid is empty. When refilling, how do I bleed it and where would the most possible place for a leak be located? leak is usually at the slave cylinder. If leaking, replace the slave. Make sure ...
...I would do if it were my vehicle that the clutch pedel was saging to the floor ... I would check the clutch master cylinder for fluid ... Then I would fill it back up and bleed the slave cylinder
...clutch loosen the bleed screw.Then check if you can press the pedal down.If you can you have to change the clutch Assembly.If you still find it hard to depress then the master cylinder needs to be ...
...fluid. If very low or dry, the clutch hydraulic system should be bled to remove air in the line. Bleeding is done down at the clutch slave cylinder on the transaxle. I would not recommend using a ...
...clutch but is seperaterated inside if fluid low? top up and bleed the slave cyl however if fluid low indicates a leak ? possibly slave cyl? if no loss of fluid ? then prob may be fault in the master ...
...system.you need to check clutch master cylinder for low brake fluid if so you need locate leak fix it.then refill clutch master cylinder have a friend around to help bleed the
1,521 questions posted
Usually answered in minutes!
1,131 Questions
1,047 Questions
517 Questions
500 Questions
255 Questions