2000 Audi S4 "cam belt" Questions

Ad

...belt or cam belt related to the sump If the sump was repaired recently could it or poor workmanship cause the guide belts or cam belt to break? Timing belt needs to be replaced every 100000 km at the ...

Ad

Question about Audi S4

2 Answers

...where a cam belt would need to be changed. timing belts should be replace at 60,000 miles. ithe focus is a belt i have a 2005 ford focus hatchback 1.6 tdci, does this have a cam belt or chain

Ad

...cam belt cover remove top cam cover retainer clip in top centre if still there and then 10mm bolt in cam belt cover just down from top middle section of cover bend gently to get to cam sensor bolt if ...

...cam gear & the belt was left out.Good luck, ChevRev P.S. This should be a round metal collar with a curve towards the cam gear to keep the belt from riding towards the cam gear .Without it the belt ...

Question about Audi S4

1 Answer

...cam belt that must be replaced every 60,000 miles. The cam belt also drives the water pump and for this reason I recommend you replace the cam belt at 120,000 miles when you replace the cam belt the ...

Question about Audi S4

2 Answers

belt on the driver side cam and crank, and then put it on the passenger side cam. You'll need to lock the tensioner clockwise about 70-80 degrees to get enough clearance to install the belt. should be

Question about Audi S4

1 Answer

cam belt broke or teeth stripped off of old belt, which unfortuneately means removing the cylinder head and getting it repaired (valves replaced and possibly guides) see some of my other posts for cam

...cam belt prob at 50,000 miles My 2006 Elantra engine is a bit noisy - could the cam belt need replacing after 80,000kms? Do you mean the "Timing Belt"? There is NO Cam belt.. .there is, however, a ...

...cam belt situated on daihatsu sirion. Is it adjacent to the fan belt?. Would the cam belt affect the power steering? THERE IS NO CAM BELT , THE TIMING BELT IS TURNED BY THE CAMSHAFT , THE POWER ...

...in certain spot as well as timming mark on belt driven cam gear to cover this cam gear is a 3:1 ratio (3 turns of cam gear = 1 turn of cams) i am putting the timing belt un time but my car dont turn ...

Not finding what you are looking for?
2000 Audi S4 Logo

37 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Audi S4
2004 Audi S4

44 Questions

2001 Audi S4
2001 Audi S4

42 Questions

2005 Audi S4
2005 Audi S4

19 Questions

2006 Audi S4
2006 Audi S4

12 Questions

1993 Audi S4
1993 Audi S4

15 Questions

Top Audi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...