1997 Ford Windstar "replace number 1 plug" Questions

Ad

...number one on 2000 ford windstar 3.8 if i have right cylinder have replaced plug and wire and still getting cylinder one misfire #1 plug is the 1st plug on passenger side by firewall I have a 1996 ...

Ad

...number 1 coil terminal to the number 1 spark plug ,being careful to use the spark plug wire that is closest in length to the length you need. If your just replacing wires,yuo shouldn't have to ...

Ad

...up. what am i missing sounds like you should check the compression on number 1 cylinder it should be about 125. if it is than chances are you need to replace number 1 injector. injector?

...the cylinder or cylinders that are misfiring will set a fault code, the codes are P0300-P0306, the last number being the number of the cylinder ( cylinders 1-6) the computer has detected a misfire

Question about Ford Windstar

3 Answers

1. Remove Wipers 2. Loosen Plastic Cowling cover 3. Remove washer fluid hoses from nozzel 4. Remove plastic cowling 5. Disconnect wiper power from connection on drivers side wiper motor. 6. Disconnect

...Number 1 Misfire Detected Possible Causes: - Improper spark plug at cylinder #1 - Insufficient compression at cylinder #1 - Incorrect fuel pressure - The injector circuit is open or shorted at ...

Question about Ford Windstar

2 Answers

...Replace the spark plugs and cylinder number one coil When 1 cylinder is misfiring, most of the time it is just a bad spark plug wire. Replace your spark plug wires and the problem should be fixed. If ...

Question about Ford Windstar

2 Answers

...number 1, replace the wires going clockwise around the distributer. on a v-8 chevy, remove distributor cap , pull out spark plug on #1 CYLINDER (LOOKING AT MOTOR FIRST PLUG ON YOUR RIGHT,)have a ...

...code reappears, replace glow plug controller. FYI: VW numbers the glow plugs backwards. IE: #1 cylinder next to the timing belt cover is number #4 glow plug...so your #2 is actually #3 on the

number 1 plug wire inside cap. replace cap and try it! please let me know if this works for you. good-day ! if you can not get to number 1 plug. just turn the crank to tdc marks are on damper pully or

Not finding what you are looking for?
1997 Ford Windstar Logo

246 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Windstar
1998 Ford Windstar

1,830 Questions

2001 Ford Windstar
2001 Ford Windstar

1,838 Questions

2000 Ford Windstar
2000 Ford Windstar

1,503 Questions

1999 Ford Windstar
1999 Ford Windstar

1,212 Questions

2003 Ford Windstar
2003 Ford Windstar

1,032 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...