1985 Volkswagen Quantum "brake pedal wont floor bleeding" Questions

...brake pedal goes all the way to the floor, it's likely there is a leak somewhere after the master cylinder. If the pedal gets hard after adding fluid, and pumping it several times with the car off, ...

...brake pedal is good, as soon as the motor is running the brake pedal goes to the floor but pulls the car up. Can anyone help please? Your brakes are vacuum aided so when engine is off the pedal will ...

...brake pedal hold the pressure on the brake pedal when opening the bleeder then push the brake pedal to the floor keep it there, until you tightened the bleeder, then pump the brakes up and hold it ...

brake pedal wont hold when applied my friend honda civic has a brake problem it start when he overheat the brake shoes coz he forgot to remove the e-brake 7 miles..so he come to me and i checked and ...

...brake pedal cant get brake pedal on 405 after changing rear calipers and one front.have put a new master cylinder on and a new brake load sensing unit pedal just hits the floor have bled it lots but ...

...brake pedal several times then hold the pedal firmly..If your doing the front only ,,then while the person is holding the brake pedal,,open the bleeder screw on the passenger side...The pedal should ...

brake pedal (all the way to the floor) and hold the pedal down while you close all the bleeder screws. Continue with normal bleeding procedures. Stomping the pedal with all bleeders open equalizes the

...pedal goes to the floor again. There Has To Be Air Getting In The Line Somewhere Keep Depressing it And Adding Brake Fluid. Make Sure That When You Bleed The Brakes You Have 2 People 1 Pushing The ...

...If so how? sounds like a bad diaphragm in your brake booster. listen for air while running at booster , disconnect vacuum hose depress pedal if it is good there should be a big difference in ...

Brake pedal goes all the way to the floor, will slow the car a little, but wont fully brake. master cylinder is fine, calipers and pads are new, brake lines look okay, it's holding brake fluid fine, ...