Question about Volkswagen Quantum
Clutch pedal goes to the floor(new clutch installed 2 wks ago) New clutch and engine installed in a 1983 VW quantum turbo diesel 2 weeks ago. Driving it yesterday the clutch pedal went straight to the
...fluid reservoir, until firm pedal. The brake reservoir also supplies fluid to the clutch. If the fluid gets low or clutch leaks, the reservoir is so designed to still allow fluid for the brake
Question about Volkswagen Cars & Trucks
...clutcH) this allows me to mount the pedal assembly and not drop the front end and cuss 10x over. see? http://no-agua.net/How_to_fix_it/clutch/clutch-all-issues.html see how to replace pedals link ...
Question about Volkswagen Quantum
...clutch pedal safety switch or starter solenoid/relay, and where would these be found for replacement? Start by checking the switch above the clutch pedal ... I have seen where they come loose, brake ...
Question about Cars & Trucks
...clutch pedal, where can I purchase a pedal or what must I do? Confused me with question pedal got lost or is too loose? probably you need to stop by transmission shop and replace your clutch pressure ...
...clutch pedal is plastic & can wear out. the later VW golfs came with an expensive automatically adjusting clutch cable. these can be installed in older VW's. the old cables had to be manually ...
...clutch pedal pulls break pedal when depressed There is nothing connecting the pedals. The clutch uses a cable to actuate the push-rod while the brake pedal is directly connected to the brake master ...
clutch pedal is stays on the floor, and is disengaged. could you give me some direction as to what my problem is? If you check your fluid in the clutch master cylinder and there is none that means you
Question about Cars & Trucks
...your clutch's slave cylinder,part is 166.00 at Autozone,Is your clutch's reservoir empty,if so then your slave cylinder is leaking and is bad.How does your clutch pedal feel,,not much or any
Question about Volkswagen Quantum
...clutch pedal on my vw bora has gone right to the floor and two plastic bits have fallen off. I have the new parts but don't know how they fit on. Can someone explain? get the haynes manual, or the ...
7 questions posted
Usually answered in minutes!
5 Questions
1 Questions
2 Questions
2 Questions