1992 Ford Ranger "steering knuckle joint" Questions

Ad

Question about Ford Ranger

1 Answer

...steering knuckle has to be removed so you can use a ball-joint press to remove and install the ball joints. The drive axles must be removed so there will be enough room to get the steering knuckle to ...

Ad

...steering knuckle is free of the ball joint, have at it using whichever means you choose to get the old one out.  You should probably get yourself a Ford repair manual., you can change the bottom ...

Ad

Question about Ford Ranger

1 Answer

...steering knuckle attaching bolts Front Disc Brake Caliper Attaching Bolts Remove the disc brake caliper from the steering knuckle. Caliper is removed by first rotating top of caliper away from ...

...steering knuckle using a suitable puller Brake hose bracket retaining bolts and bracket Upper control arm-to-steering knuckle pinch bolt and nut Upper control arm from the steering knuckle Lower ball ...

Question about Ford Ranger

1 Answer

steering knuckle. Remove the nut attaching the outer tie rod to the steering knuckle. To do this, hold the tie rod end stud with a wrench while loosening and removing the nut with a standard wrench or

Question about Cars & Trucks

1 Answer

...steering knuckle any suggestions ( BROKE : Ball joint separator , tie rode separator) How do I free driver side lower ball joint from steering knuckle? You have to put lever on joint,and pry it ...

Question about Ford Ranger

1 Answer

...STEERING KNUCKLE.REMOVE BALL JOINT BY PRYING IT FROM THE KNUCKLE.REMOVE BALL JOINT TO LOWER CONTROL ARM BOLT AND NUT. INSTALL NEW BALL JOINT TO LOWER CONTROL ARM.TORQUE THE BOLT TO 86 FT LBS INSTALL ...

How to replace lower ball joint on a 2002 mercury sable THE LOWER BALL JOINT IS AN INTEGRAL PART OF THE STEERING KNUCKLE.IF LOWER BALL JOINT DEFECTIVE YOU HAVE TO REPLACE ENTIRE STEERING KNUCKLE.

...steering knuckle. If sensor head is seized due to corrosion, use hammer and brass punch to tap sensor. Tap edge of sensor ear, rocking sensor from side to side until it is free. DO NOT use pliers on ...

steering knuckle/ball joint I replaced two bad ball joints and torque checked all steering and suspension equipment on the front end. Took the car in for new tires and alignment. Tire shop told me the

Not finding what you are looking for?
1992 Ford Ranger Logo

1,000 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...