...head bolts:1 - Tighten in sequence (as pictured) to 37 ft-lbs.2 - Tighten an additional 60 degrees.3 - Loosen all bolts completely.4 - Tighten in sequence 26 - 32 ft-lbs.5 - Tighten in sequence an ...
...Step 5: Bolts 1-10 plus 50-55 degrees. Step 5: Bolts 11-14 to 74 inch lbs. (8 Nm). Fig. Cylinder head torque sequence-1.8L engine Fig. Tighten the valve cover bolts in sequence-1.6L and 1.8L ...
Question about GMC Cars & Trucks
...head bolts (1 through 14) in sequence to 22 ft. lbs. Step 2: Tighten the same bolts in sequence an additional 155 degrees Step 3: Tighten bolt 15 to 62 in-lbs plus an additional 120 degrees Step 4: ...
Question about Chevrolet Lumina
...------20 Nm 14.75 lb STAGE 2--------------40 Nm 29.51 lb STAGE 3 Turn head of bolt 90 degrees of rotation. 8 - 6 - 1 - 3 - 9 10 - 4 - 2 - 5 - 7 first stage-15NM second stage-30NM third stage-90 ...
...head bolts on a 2005 Audi A4 1.8T engine are as follows: Step 1: Tighten the bolts in the sequence shown to 30 Nm (22 ft-lbs) Step 2: Tighten the bolts in the sequence shown to an additional 90 ...
...head bolt torque specs for a 1999 grand am - i am trying to replace the heads on 1999 grand am with 3.4 engine Fig. Cylinder head bolt tightening sequence-3.1L engines & 2001-04 3.4L engines Fig. ...
head bolt torque for a 1996 ford ranger 2.3liter head bolt torque specs The torque specs and tightening sequence can be found in Haynes repair manual #36071.Ford Ranger 1993-2005 tighten first to ...
Question about Fiat Cars & Trucks
...head and cams please Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees ...
...head bolt torque specification for a 2005 aveo install: The cylinder head should be cleaned and inspected prior to installation. Lightly oil all bolt and stud bolt threads before installation. Clean ...
933 questions posted
Usually answered in minutes!
964 Questions
809 Questions
639 Questions
448 Questions
418 Questions