...door lock actuator. Sometimes working the lock/unlock button will make the door unlock. If not, the door will require disassembly from inside to determine what the failure may be. If the door needs ...
...door lock may be corroded. Go to any auto parts store and get an aerosol can of a product called WD40. Squirt three quick squirts into the problem lock and wait 30 minutes for the chemical to work. ...
...lock but will not unlock the door (this is the right key for the door), doors can be unlocked from the inside. Door handles on outside of car do not work at all. This is the 2-door car model. there ...
door handle inside of the door panel you have to take the panel off and look it is eather the clip[ broke or the handel is broke inside ,i would take it to a shop unless you have the tools and time to
...door and it gos in a circle SOUNDS LIKE YOUR LOCK CYLINDER OR ACTIVEATOR CLIP IS FALLEN OFF YOU WILL NEED TO REMOVE DOOR PANEL THEN IT SHOULD BE VISIBLE OF WHERE IT CAME LOOSE Sounds like the linkage ...
...reset security system there is no reset other than locking and unlocking the driver or passenger front doors with the key, the disable switch is inside the door on the door latch of both front
...the interior door panel and door handle and then reconnect the linkage. It is a bit of a trick to reach everything, but it is do-able. did the door lock rod get pushed or activated when ...
...front door and now the door wont open at all i think it is the lock how can i get the door open will it open from inside? If it will then you didn't hook up the linkage right on the outside ...
inside the door frame) will go into this yoke and it will rotate upward as the door latches. Remember to lift the door handle before prying down on the locking mechanism (yoke latch). If your latch is
288 questions posted
Usually answered in minutes!
964 Questions
809 Questions
661 Questions
639 Questions
448 Questions
