...camber only,no caster adjustment is possible. Also,alot of the alignment problem may be ride height,as the springs get weaker,the rear end sags and the camber goes negative. Often the camber can be ...
...camber adjustment Is there a camber adjustment on a 92 honda accord? if yes, where? and how? There is no no camber or caster adjustment on that model. If the car has been in an accident, chances are ...
Question about Cars & Trucks
springs on the axle. The camber is set by bending the front axle. If is an independent front suspension there will be adjusting wedges or cam plates at the arm pivots The solid axle can be adjusted by
camber is out of adjustment, it will cause tire wear on one side of the tire's tread. If the camber is too far negative, for instance, then the tire will wear on the inside of the tread. If the camber
...camber, caster and toe ] are now out of spec, Depending how much you altered the angle, you may be able to bring it back into spec; by adjustments or installing items like balljoint cams etc. If you ...
...Camber is difficult, most times requiring ball joint replacement using offset joints, but that does not often change or cause pull. Caster is adjusted by placing shims between the lower control arms ...
120 questions posted
Usually answered in minutes!
368 Questions
126 Questions
85 Questions
70 Questions
61 Questions