2003 Pontiac Grand Am "fix ignition locking jeep" Questions

Ad

...fix? depending on whitch lock it is (door,ignition or glove box) you can replace the lock with a keyed alike cylinder or have yours repaired by a locksmith they are not hard to replace but the ...

Ad

Question about Pontiac Grand Am

3 Answers

...fix your problem, you will have to replace the tumbler assembly. the ignition key switch is one whole peace it just plugs into the colum its not very exspensive i just replaced mine not long ago.just ...

Ad

...Ignition Switch. Not sure what the fix is gonna be yet. Any thoughts are welcome. first off I would try an alternate/spare key, if it's off just a little bit that is what would happen. When the key ...

...Fix that and is it a fuse that went out. Are do I have to take it to the dealership. Jeep 1990 and later Remote keyless entry programing Put the key in the ignition with all doors and trunk ...

...now the Jeep won't start at all how do I fix it. It has prostart remote and security system installed USING THE IGNITION KEY LOCK AND UNLOCK THE DRIVERS DOOR MULTIPLE TIMES TO RE-SET THE

...ignition. sounds like the key is either worn down to where the ridges in the key wont push the tumblers inside the key lock cylinder into their proper place to move the cylinder into the starting ...

Question about Pontiac Grand Am

2 Answers

...fix this? The seat belt does not work on an ignition locking device. Need to remove side panel and visually inspect roller and gear locking mechanism. jeep 2006 Grand Cherokee - Issue: Seat Belt does ...

Question about Pontiac Grand Am

6 Answers

ignition security on/off is located at the trunk lock. unlock and lock rear gate and the alarm will turn off. My jeep sat in my drive for a month before a jeep tech told me this. It still triggers the

...ignition. (Harder is not better) strike straight on as to not break the key off. 4 or 5 strikes should fix the problem every time. FYI - flooding the switch with WD-40 will not fix the issue, it is a ...

Question about Pontiac Grand Am

1 Answer

...works. but keep in mind that the only fix is to replace the ignition lock cylinder. and make sure that the key is not twisted or bent because that could also inhibit the key from turning ...

Not finding what you are looking for?
2003 Pontiac Grand Am Logo

1,796 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...