...post your engine size so please pick the applicable diagram: 2001 Mazda Tribute DX 2WD 3.0 liter DOHC V-6 2001 Mazda Tribute DX 4WD 2.0 liter DOHC L4 2wd or 4wd...it is still the same for the
...Tribute V6. It was running fine then poof it was running rough. I am being told it may be a vacuum leak, or a mass air sensor, or a pcv or vacuum to or from the pcv. Anybody have any experience with ...
...tribute v6 engine no mazda tribute v6 location of engine no? The engine number is recorded on the original factory invoice from Mazda to the dealer who received the Tribute from the factory. This is ...
Question about Mazda MPV
...Tribute V6 3.0 and I'm trying to find were the pulse damper vacuum hose connects to? Please help. The pulse damper vacuum hose on a 2001 Mazda Tribute V6 3.0 connects to the intake manifold. Look for ...
...tribute 2004 3.0 V6 when i start engine is choking and i can feel the vibration inside the car prior to that engine is in good condition but after changing the spark plug the problem starts when i ...
2003 mazda tribute v6 - washed engine now missing running rough and check engine light is on probable a coil take it to autozone an they will put on a test an tell with one for free
...tribute V6 standing in front of your car. starter is located on the back side of the engine on the left side. sits parallel to the ground. about 3" round and about 5" long. you'll find it where the ...
...tribute v6 They are under the ignition coils on each side of the engine. The left bank (front of engine compartment)can be relaced by removing the plastic cover then removing the connectors and bolts ...
Does 2001 Mazda Tribute V6 engine have a serpentine belt Yes, but it uses a timing chain for the valves
What does the vacuum line going through the fire wall hook to under the dash on a 03 mazda tribute v6 engine It goes in and hooks to blower motor inside
761 questions posted
Usually answered in minutes!
692 Questions
413 Questions
309 Questions
262 Questions
128 Questions