20 Most Recent 2003 Mazda MPV Questions & Answers

Your catalytic converter may be clogged

2003 Mazda MPV | Answered on May 01, 2019

Hi, as you look at the belt it will rotate to the front of the car. hope this was some help all the best.

2003 Mazda MPV | Answered on Feb 08, 2019

Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommended it to me and I thank him even today
They have full manuals and it's verrrrry cheap and mine
I got free in offers
3rd time I also had an issue with
the file so the girl replaced it in 30 mins
there is one more but i don't remember its name it was 2 years back bitman something link this
Try it out brother

2003 Mazda MPV | Answered on Feb 05, 2019

Well as of 2005 or so the v6 tribute has a Ford motor that has a timing chain not a belt the 4 cylinder has a Mazda motor that has a belt and should be changed every 90000 miles. So those swing the v 6 has a belt are totally wrong here

2003 Mazda MPV | Answered on Dec 19, 2018

go the website where you translate the language and go through it find out how it can be changed it sould be in the main menu

2003 Mazda MPV | Answered on Mar 30, 2018

It sounds like the trans itself. if you would like to take it to a trans specialist to fix the 1 problem u have u can. Judging by the yr/ make & model I would advise you to to replace the trans assy complete. the rest of the gears & plates in the trans are not in top shape either.

2003 Mazda MPV | Answered on Feb 08, 2018

You need to have the Body Control module (BCM) tested for proper function.

2003 Mazda MPV | Answered on Dec 25, 2017

get solution from the given link they will provide you the manual so that you solve your problem http://toolsnyou.com/

2003 Mazda MPV | Answered on Dec 15, 2017

-Both switches (Driver side and passage side) do the same thing ?-If so then there is a bad connector at the motor. Power line or ground.
-But can't open only on 1 switch. Then that switch is worn out.

Good luck


2003 Mazda MPV | Answered on Dec 08, 2017

it is a regular fault
generally it is the Heated oxygen sensor (HO2S) in the exhaust manifold before the cat converter
other cause can include engine mechanical fault ( unlikely)---wiring---ignition / fuel system--injectors ---ECT/MAF sensor---ECM
a vacuum problem will affect both banks as will a PCV valve
The HO2S reads the exhaust gas composition and reports to the ECM which then adjusts the air /fuel ration accordingly to keep it within set parameters
The code says bank 2 sensor 1 which is the HO2S sensor so replace it and then have the codes read again

2003 Mazda MPV | Answered on Dec 03, 2017

Start with the fuses or relay

2003 Mazda MPV | Answered on Oct 28, 2017

all these codes can be problem except 306 misfire start with 103 113 and 335

If you need further help, reach me via phone at https://www.6ya.com/expert/james_9c1b039055413ffa

2003 Mazda MPV | Answered on Oct 03, 2017

Tcs is not related to the engine. Please get a scan and post the trouble codes here.

2003 Mazda MPV | Answered on Jul 19, 2017

Not finding what you are looking for?
2003 Mazda MPV Logo

678 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Mazda MPV
2000 Mazda MPV

669 Questions

2001 Mazda MPV
2001 Mazda MPV

446 Questions

2004 Mazda MPV
2004 Mazda MPV

302 Questions

2002 Mazda MPV
2002 Mazda MPV

261 Questions

1997 Mazda MPV
1997 Mazda MPV

127 Questions

Top Mazda Experts


Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MPV Mazda

  • MPV Mazda

Most Popular Question

electrical locks mazda mpv 2003 not

  • Cars & Trucks