1988 Nissan 200SX "crankshaft" Questions

ware to locate crankshaftpositionsensor on car On a Nissan Maxima (Cefiro) V6 the crankshaft positoining sensor os towards the front of the car.It is midway on the motor about halfway down. Also it is

...revised to reflect this new procedure. Caution ^ After removing the timing chain, do not turn the crankshaft and camshaft separately or the valves will strike the piston heads. ^ When installing ...

...a ca18det engine, the car wont start but there is a spark and its getting fuel, i think it could be crankshaft sensor but i dont know where it is located to check it, i could be on the wrong track, ...

...the ignition coil is good. I have checked for a spark and haven't got any. please help Could be the crankshaft sensor, wiring, or the coil/ignition module. Che k to see if there is power on the ...

Where is the crankshaft position sensor? Pontiac G6 Crankshaft Position Sensors - AutoZone www.autozone.com/1/.../pontiac-g6-crankshaft-position-sensor... AutoZonePontiac G6 Crankshaft Position ...

how do you remove the crankshaft dumper pully? Published: 11-May-2011 Engine - V8 4.4L Petrol - Crankshaft Pulley In-vehicle Repair Special Tool(s) Holding Tool Crankshaft Pulley 303-893(LRT-12-080) ...

Bolt on crankshaft to remove clockwise or counterclockwise? Crankshaft Damper/Pulley counterclockwise to remove pulley: REMOVAL & INSTALLATION Remove the drive belts from the crankshaft damper. ...

...Wrench EN-658-1 Installer For equivalent regional tools, refer to Special Tools. Install a NEW crankshaft position sensor reluctor ring?(1) and the 3?bolts?(2). Tighten the 3?bolts?(2) to ...

How do you know set the couiter balanceto the crank? TKS. THE CRANKSHAFT VIBRATION DAMPER CRANKSHAFT THROWS AND FLYWHEEL ALL BALANCE THE CRANKSHAFT.IF CRANKSHAFT OUT OF BALANCE AND VIBRATION GOOD AND ...

is there a woodruff key that is located on the outside of the crankshaft that runs the timing chains? The wood-ruff key is used to keep the crankshaft timing gear in place and on time with the ...