2003 Oldsmobile Silhouette "head bolt torque" Questions

...of bolt head rotation. Some guys don't fuss with the torque specs and just get them good and tight. Either way, be careful, as the heads are aluminum. You do not want to over tighten these ...

bolt head and then remove it. It is a long bolt and might have to come out with the alternator, meaning it is too long to be slid out of the alternator when it is in the position it normally is on the

...head bolt torque specs for a 1996 saturn sl Quote: Originally Posted by norvelplagbao52 1993 saturn sl2 1.9 dohc cylinder head torque specs and sequence Cylinder head bolt tightening procedure: ...

...head bolt troque spec for 3.4l impala sfi04 Please don't forget to rate. Thank you: Left side front cylinder head Cylinder head bolt torque sequence-3.4L engine Cylinder head by aligning it with the ...

head bolt torque sequence?3.4L engine Cylinder head by aligning it with the dowel pins New cylinder head bolts coated with a sealant (such as GM 1052080). Torque the bolts in the proper sequence (1-8)

head-bolt locations, it would be a good idea for you to purchase a vehicle specific repair guide that will show this info. Take particular note about the TTY (Torque to Yield) bolts used on 2 of the 3

...head bolts, a long bolt and a short one . The torque on the long one is 46ft./lbs. and an additional 90 degrees . The short one is 43ft./lbs. and an additional 90 degrees . Looking at the head from ...

...head bolt torque specs I have 1994 Oldsmobile Cutlass Supreme with 3.4 Liter engine. I am replacing the head Gaskets and need to know the proper torque specs for the cylinder head gaskets. My manuel ...

head bolt toqure subaru EJ25 headbolt toqure settings any ideas Hope this helps, from autozone site. Curt Application: Cylinder head bolt torque sequence Note : Torque sequence: --------- front | 3 1 ...

...Head Bolt Torque... Torque Sequence -------------------- Front | 7 2 4 6 | Of | 5 3 1 8 | Engine --------------------- | 5 3 1 8 | | 7 2 4 6 | --------------------- Step 1 - 12 Point bolts: Torque to ...