2003 Oldsmobile Silhouette "1st shift gear solenoid" Questions

...1st or 4th available; trans shifts 2nd to 3rd by itself in D or OD and locks the converter : ShiftA solenoid failed. Easy fix in the pan. Or a wiring problem from PCM to trans.. or PCM. Car goes into ...

...1st gear shifting to second Tranny runs fine once past first gear. On occation, when I stop at a stop sign, hit the gas, the van will move, but then 'buck' or hard shift into second. After playing ...

shift hard, or fells like it jumps into 1st gear after backing up in morning after car sat all night Only way to get an answer is to get it diagnaosed. There is nothing you can do at home. There is no

...shift out of 1st gear, trans fluid is clean and full, what could be the problem ? There could be a number of possible reasons why your G30 Chevy van is not shifting out of 1st gear. Some potential ...

...1st gear have replaced the shift solenoids and is still stuck in 1st gear If your 1998 GMC 4x4 pickup is stuck in 1st gear even after replacing the shift solenoids, it's recommended to have a ...

...1st gear.has over drive lighte on.i can manualy shift thru all gears.allso the insrtrument panel lights on the gas guages and speed ometor are going in and out. you need 1 and 2 shift solenoid ...

...shift out of 1st gear Just replaced the transmission- Automatic. It will shift through all gears for about 3 miles and then it won't shift out of 1st. Any ideas? could be losing line pressure inside ...

...shift solenoids in valve body. A combination of either solenoids on or off gives 4 speed selection. For instance all solenoids off gives 3rd gear for limp home. Sounds like 1 solenoid is off all the ...

...shift. Transmission shop ran codes and said I needed to change solenoid D. Cannot find any info on solenoid D, just A any help would be appreciated i have hard time shifting from 1st gear to 2nd gear ...

...won't shift into high gear. are there any codes? Does it shift ok in 1st and 2nd? sounds like your over drive shift solenoid or your 3 and 4 shift solenoid is stuck and needs to be ...