1995 Oldsmobile Aurora "belt drive" Questions

water pump belt chirping check belt for cracks or damage, also check tension on belt and tensioner, ensure no coolant got on belt. these all could cause chirp, as well as other accessory drives that ...

driving belt diagram driving belt You didn't mention engine size so here are both diagrams... V-6 3.5L V-8 4.0L

...belt routing. Item number 6 is the belt tensioner, using a 3/8 inch drive tool turn the tensioner clockwise to remove the belt. Insert the tool into the red opening. I hope this helps. Regards, ...

to change a water pump belt, do i need to take the water pump off ? Hi Michael: I'd hope not. Usually (generically speaking) the belt that drives the accessories is held in place by tension sourced ...

Belt broke while driving, located on the driver's side near the waterpump, what belt is that? IF IT IS A 2.3 LITER IT IS THE POWER STEERING BELT

...not serviceable under routine maint. only if mechanical problems arise. do you mean the accessory drive belt? once again, sorry, didnt mean to sound like a wiseguy! a retraction would be

...Drive belt Idler pulley Water pump pulley NOTE: The water pump is attached to the engine with both long and short bolts, be sure to note their locations. Water pump and discard the gasket NOTE: Note ...

...DRIVE BELT ON IT.WHEN YOU REMOVE WATER PUMP DRIVE BELT COVER.THE WATER PUMP A ROUND THING WITH NOTCHES ALL AROUND IT.YOU NEED A REMOVER AND INSTALLER TOOL NUMBER J - 38816 WATER PUMP TORQUE IS 73 FT ...

...drive belt. For tensioners not equipped with this hole, use the proper-sized socket and breaker bar (or a large handled wrench) on the tensioner idler pulley center bolt to pivot the tensioner away ...

belt from a 1995 oldsmobile aurora Insert a 1/2" drive ratchet into the tensioner and rotate tensoiner clockwise to remove the belt. The engine size picture is a 4.0L (I'm guessing on your engine size