1999 Buick Riviera "remove pulley power steering" Questions

Ad

...remove the power steering pump pulley? Does it take a puller? there are two bolts that hold the power steering pump in place that are accesable through the holes in the pulley. If you use a 6" ...

Ad

Question about Buick Riviera

1 Answer

...remove power steering pulley to be able to replace tension belt? I have never seenan engine where removing the power steering pulley was required to replace the belt. I could give you instructions on ...

Ad

how to remove power steering pump pulley on 1996 buick riviera w/sc With a special tool called a power steering pulley puller. You can borrow this from some auto stores.

...pulley bolts. Remove belts. Remove alternator bolts and lift out of the way for easy access to power steering bolts. Remove 2 power steering bolts using access holes in pulley. You should be able to ...

Question about Buick Riviera

2 Answers

...pulley. How do I release the tension of the belt? There are 2 sepentine belts on your vehicle. You must use a wrench to turn the belt tensioners. Usually a breaker-bar works well. The tensioner for ...

Question about Buick Riviera

2 Answers

...PULLEY AND REMOVE THE POWER STEERING BELT.WHEN THE POWER STEERING DRIVE BELT IS REMOVED PUT A DRAIN PAN UNDER POWER STEERING PUMP FROM UNDERNEATH THE VECHICLE.DISCONNECT THE HYDRALIC PRESSURE AND ...

...Remove power steering pump pulley (3A733) . Position drain pan. Remove power steering pressure hose (3A719) and power steering return hose (3A713) from power steering pump (3A674) . Remove four power ...

Question about Buick Riviera

2 Answers

...remove the pulley from the power steering pump shaft. Disconnect the pressure hose from the power steering pump and allow it to drain. Remove the power steering pump retaining bolts and the pump. To ...

pulley. Remove the oil dipstick tube. Remove the power steering pump support (3C511). Install Steering Pump Pulley Remover T69L-10300-B on the pulley. NOTE: Do not apply pressure on the power steering

Question about Buick Riviera

1 Answer

...Remove the idler pulley from the power steering pump support. Remove the belt tensioner. Remove the bracket mounting bolt located under the belt tensioner mounting. Remove two retaining nuts from the ...

Not finding what you are looking for?
1999 Buick Riviera Logo

53 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...