2004 Mitsubishi Endeavor "remove lamp socket ring" Questions

Ad

Question about Mitsubishi Endeavor

3 Answers

...lamp wires. Remove the retaining ring screws from one or both lights. Remove the retaining rings. Remove the light from the housing. Disconnect the wiring connector from the back of the light. Push ...

Ad

...lamp bulbs Remove headlight / lens assembly per below steps mentioned later Rotate the bulb socket of the offending bulb counterclockwise and remove from the lamp assembly. Carefully pull bulb ...

Ad

Question about Mitsubishi Endeavor

1 Answer

...Remove stop lamp switch from pushrod. Disconnect stop lamp switch electrical connector. To Install: Connect stop lamp switch electrical connector. Snap stop lamp switch onto pushrod. Using an 11 mm ...

Question about Mitsubishi Endeavor

1 Answer

...lamp to the van. Disengage the electrical connection by grasping the wires and snapping the connector rearward. Remove the bulb retaining ring by rotating it counterclockwise (when viewed from the ...

...remove the old bulb from the lamp assembly by pulling it straight back out of the lamp assembly and replace. 7. Install the new bulb in lamp assembly by pushing straight in with the bulb?s plastic ...

...remove the lamp socket. Be advised that this vehicle used REALLY CRAPPY lamp sockets, whose wiring is substandard, and either melts or breaks, causing intermittant bulb outages at first, and ...

...lamp switch OFF until the bulb change is complete. Always wear eye protection when changing a halogen bulb. Handle the bulb only by its base. Avoid touching the glass. Keep dirt and moisture off the ...

...remove the old bulb from the lamp assembly by gently pulling it straight out of the lamp assembly. To install the new bulb: 1. With the flat side of the bulb’s plastic base facing upward, insert the ...

socket. It's very common for this connection to get corroded. Remove the screw, polish the ring and screw just enough so clean bare metal is visible (Scotch-Brite (TM) or similar is the best product I

Question about Mitsubishi Endeavor

1 Answer

...remove lamp assembly. Repeat on opposite side of vehicle. With turn/park lamp assembly removed, screw attaching grille to front fender flange is accessible. Remove grille attaching screw. Repeat on ...

Not finding what you are looking for?
2004 Mitsubishi Endeavor Logo

1,126 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...