...EGR valve 4 times. I even got an OEM part. Still getting error. I have changed the TIPM and the computer. Both came from a reputable business, still getting the same error. NEED ADVICE PLEASE. Help ...
Question about Chevrolet Cars & Trucks
...EGR flow. Clean the intake manifold thoroughly. Thermostat: You've already replaced the thermostat, which is good. A faulty thermostat can cause overheating or poor engine performance. Make sure the ...
...EGR valve ok did you check for vacuum leaks,is the fuel pressure gooddid you change your air filter,did you check around the intake manifold for vacuum leaks,is the engine missing if it is do a ...
...time I had it smogged in March 2010 it BARELY passed on all readings (HC, CO, NO). Wondering what this could be. Any ideas? Please help me....... I'm thinking maybe the EGR valve? pull off ur egr an ...
Question about Mitsubishi Eclipse
...replace per service list will slip and go retarded. and compresson falls, and engine misfires badly. the timing is tricky because there are 2 engine heads used. warning ,do not use the wrong ...
...EGR valve, overadvanced ignition timing, engine overheating, carbon buildup in the combustion chambers, or low octane fuel.Hope this helps; also keep in mind that your feedback is important and I`ll ...
...time after fixing iac sensor....the car will purr like a kitten for a day or two and code will dissapear only to come back driving rough and with code popping back up. 6 weeks ago oil ...
Question about Jeep Cars & Trucks
...EGR valve to stick open, must not DTC. P0401 to 406? it has MAP sensor to fail or just clogged up at its vacuum port or engine has vacuum leaks but that cases RPM to RACE too fast. using a real scan ...
...time and crack or can rub through. It's possible they are clogged. The n75 solenoid controls the turbo wastegate or VNT vanes with either vacuum or pressure. b4 Passat - on firewall above coolant ...
380 questions posted
Usually answered in minutes!
696 Questions
644 Questions
360 Questions
344 Questions
319 Questions