Sharp AR-5320 Black and White Copier "top printer light blinking 2" Questions

...top access door on the printer. 2. Remove the ink cartridges. 3. Turn the printer off, then on again. 4. Replace the ink cartridges. 5. Close the top access door. Solution Four: Issue The 2-Sided ...

printer goes offline, and I have to push the top button. It then prints 1-2 pages and does the same thing again. My "paper jam" light is blinking all the time. There is no jam, though. Any help? get a

...printer. They will blink continously if: if the print cartridge status light is flashing -- check if the top cover is open, Close the top cover. -- there may be a problem with a print cartridge 1. ...

...printer. There is no media jam. Figure 8: Paper jam 13.JJ.NT JAM IN TRAY 1 13.JJ.NT JAM IN TRAY X The Attention LED is blinking. Check paper loading then open and close top cover. When there is a jam ...

...Printer has stopped printing and two red lights are flashing on the top. I can't seem to find anything on the web about this error, I get no error msgs. this means that your printer need to be reset ...

printer Never had a problem in over a year. now it wont print and the top left button is flashing yellow. ink cartridges are new. There are 2 lights, one green and one orange. If the green one blinks,

...top cover and wait for the printer to initialize. If the Print Cartridge light is still blinking, the printer case may be dislodged or slightly out of position. To restore the printer case to the ...

...light to blink. Without knowing what the "event log error" is, I'll give you the 5. 1. top cover is open 2. out of paper 3. paper jam 4. paper misfeed 5. fuser missing or not installed ...

...top cover to the printer. 2. Turn the printer off and then on again. 3. Unplug the power cable from the back of the printer when the grinding noise starts. 4. Move the carriage towards the middle of ...

...top control button to stop flashing and the machine won't print. Canon IP 2000 / reset 1. Turn off printer 2. Hold down Resume button and press Power button. 3. Keep holding down Power button and let ...