...it.some brands you can tighten the belt by taking motor loose and it works like tension pully and tighten when belt feels tight.some you just need to change the belt because they do stretch over
...to the right as for as possible. helped tighten the pump belt a bit, but drive belt still too loose. how do i tighten up the motor? get yourself a new belt the old one is stetched and no longer ...
...remove back to access motor. You'l see adjusting bolt(s) -- loosen them -- pry motor to get tension on belt -- while holding motor in place tighten adjusting bolt(s). More info, let me know. ...
...of some kind, or a large cresent wrench to tighten the belt by turning the motor mount (it swivels), hold the belt tight and tighten the locking nut. The machine should be ready to go for a long
Also tightened up pulley. What have I not done? You most likely didn't tighten up the belt tensioner, this adjusts the tightness of the belt, so as it stretches, during use, this can be, adjusted out
Question about Washing Machines
...panel check to see if the belts snapped put new one on there should be a nut that tightens the belt up on the motor psrt put belt around drum part and motor and move the motor to tighten yhe belt ...
...sqeeling when it went to spin so i tightened the belt and i may have missed up the cluch ajustment with the bar i used to tighten motor blelt thank you If you over tighten the belt it will not
...loosen the belt tension bolt. Then place the belt over the drive wheels.Now tighten the belt tensioning bolt, while applying force to the belt to tighten it around the drive wheels.take ...
...belt well I wouldn't tighten any belts ,it's best to replace em top loaders are a little tough to do as one needs to tip machine over (or lay on floor) to access it front loaders are easy as drive ...
Question about Maytag Washing Machines
...tighten the belt of Maytag washer model SAV365AAWW? Depends how good you are with disassembly. It's not that difficult and you need to shut off the water and unplug the machine. The front needs to be ...
143 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions