...plate, a melted cover dish and now the microwave doesn't work. i checked fuses, etc. and all is working. did the process damge the microwave? There is a reset somewhere around the top or close to ...
...plate probally in the roof or close to the top of the uniton the inside sidewall, normally held in by one screw this should also be removed and cleaned. If the hooks are melted bad enough they will ...
...top round disk/plate of the unit. Is this a danger in any way. The unit seems to operate but we did not have anything with us to test or heat up. That is the Wave Guide cover and must be replaced to ...
...top plate apart (they super glued one screw in the top plate (lid), you'll strip out the screw head trying to remove it anyhow). All you need to open is the bottom plate, it has 4 screws in it you ...
Question about Panasonic Microwave Ovens
...top of the magnatron was not connected. It was blackened and looked like it had sparked. I tested the fuse and it tested fine. I tried to solder the metal plate back onto the fuse - once I had it ...
...plate cover we keep in there melted to a puddle and the microwave has no indication of power. Fuse is still good. Any chance there is a reset button or thermal protection diode that could be replaced ...
...Enter/Start: This is used to start and enter any option you choice while operating the unit. Stop/Clear: Use this function to clear or stop the unit during cooking or choosing a feature.
...top of the microwave for the usually included service sheet and it is not there. Is it located somewhere else in this model? What is the problem? Control board? Magnetron? Something else? Any help ...
...Top door switch was sticky.. 1 small squirt of wd40. I worked the switch several times and it worked perfectly. That took 10 minutes and saved 70 bucks. My wife was already online shopping for a new ...
298 questions posted
Usually answered in minutes!
177 Questions
118 Questions
86 Questions
90 Questions
53 Questions
