Canon PIXMA iP90 Mobile Printer "not printing paper" Questions

paper. When printing is complete, reload paper according to the displayed message and then click OK. The document will be printed on the opposite side. If Photo Paper Plus Double Sided is selected for

...paper printing to photo paper printing. Also look at the Print quality and colour saturation settings and try to print in Fine or High Quality when printing on photo paper If none of the solve the ...

Printer will not allow paper to flow freely; it jams on the left side and prints crooked. I doesn't matter how much paper I place in the printer, the paper always loads crooked and does not print. ...

...paper there. Printing documents with plenty of photographs or illustrations. When the POWER lamp is flashing green, the printer or the computer is processing data. Printing large data such as photos ...

...printing (Photo Paper Plus Double Sided, postcards, plain paper) On the rib(s) inside the sheet feed unit used for duplex printing, ink mist may accumulate, smearing paper. Temporary operational ...

Can't print on 4 X 6 paper I have a Canon Pixma MP160. Am using Kodak soft gloss 4 X 6 paper, and Easy Photo Print program. One picture printed...but it printed vertically instead of ...

...printing paper to confirm if the paper curl is eliminated to within approximately 2 to 5mm / 0.08 to 0.2 in (B). It is recommended to print on curl-corrected paper one sheet at a time. The media type ...

...printing on both sides of the paper (if your printer has that feature available). It will usually require you to put the paper back into the printer a certain way. If your printer does not have this ...

...paper , it is just printing very small in the corner of the paper , can you help i need it to print to the size of the paper You need to set the paper size in page setup everytime you change paper ...

...paper, and restart printing from the front side of the next paper. The reverse side will not be printed when an error occurs. Eleven flashes: Cannot perform automatic print head alignment correctly ...