2007 Dodge Nitro SLT "connect fog lights" Questions

...the fog light housing. 3)Install the new fog light bulb.Then connect electrical plugs properly. 4) Test the fog lights by turning it ON. Thanks. you can rate this solution and show your

...switch to the double switch(front an rear fog switch) if you buy this off a scrap car you cut the wiring and connect rear fog plug to bottom of switch and connect front fog wiring to the top

...the fog light housing. 3)Install the new fog light bulb.Then connect electrical plugs properly. 4) Test the fog lights by turning it ON. Thanks. you can rate this solution and show your

...fog lights are not connected to a grille, proceed to step 2.)Find the bolts that hold the fog lamp in place; you may have to get underneath the automobile to do so.Using your ratchet wrench, remove ...

...connect to your low beam headlight. Terminal 85 should go to the fog light switch. The fog light switch should connect to the terminal 85 and the other terminal on the switch will connect to

...fog lights There may be a connection in the harness or a place to connect the cabling, but what you'll find out is that the light switch is different for the trucks that have fog lights from the ...

...connect in order to get these o.e.m. fog lights to work in my 1999 Mercury Cougar, which, in my best understanding, did not come with fog lights when it was originally made? Look under the dash near ...

...fog lights not working bulbs ok and fuse ok rear fog lights works but not the front fog lights can any body help try changing the relay for the front fogs,the front and rear are not connected in any ...

fog lights should not work with high beam... they should work with the low beams. they are connected wrong, which probably drew too much current through the light switch burning out the contact points

...the bulb in the socket without touching the glass with bare hands. Turn the socket about 45° clockwise to install it. Connect the connector to the fog light. Install the fog light mounting