Peavey SP2 PA Passive Speaker "speakers" Questions

I Have a Peavey XR 600B mixer. There are only 2 inputs in the rear for speakers. I want to add more speakers to be used as monitors or just have extra speakers. How can this be done? I only have ...

One of my Fender Passport 500 speakers has started to crackle sometimes, particularly when the song has a lot of base. What could be causing this? Would a regulator help? You have probably blown the ...

flextone 3 one speaker not working Then you either have a blown amp or speaker. Turn the amp off and move the wires from the speaker on the working side to the other speaker. If the other speaker ...

...a shortcut to a jackplug and inserted that. Connecting an extension speaker apparently wires the speakers in series, instead of parallel as I would expect. In my opinion the design and

and disconnect the hot rod's internal speaker, and hook the replacement speaker up in the internal speakers place. a speaker of 50-100 watts should be suitable, and it will probably need to be 8 ohms

i dont know how to connect my gem sound trf152 speakers Looks like it takes regular home theatre speaker wire.  If this is a powered speaker (like a JBL eon g2), then all you need is a passive ...

the loud speaker doesn't work . my loud speaker do not work , he is fixed correctly Hi there. With speaker disconnected. use an ohm meter to check the continuity of the speaker voice coil. (speaker ...

...no sound in the left speaker, unplug everything and do the following: connect the left and right speakers with the supplied phono lead (Probably black) between sockets labelled "to left speaker" ...

We heard a loud pop... then saw a flash of light set off by the internal speakers. What causes this? Are these speakers out of phase? What's causes this? These are rated peak 600 Watts... your amp