GE Profile JGB900 Gas Kitchen Range "door lock keeps locking" Questions

...Door lock keeps clicking won't lock and so won't clean Could be a malfunction in the lock mechanism, But if this is a newer oven or first time cleaning, the oven door seal may be holding the door out ...

door lock issue. The control sees it as locked, unlocked, or both at the same time. The technical manual instructs us to check the wiring to and from the door lock mechanism and if no issues are found

door keeps flashing oven door does nt open locked door is flashing and oven will not go on, help need to disconnect dorr latch if anyone knows how after self cleaning oven door locked with code e1 and

...switch assembly. It tells the control that the door is locked. When it continues to cycle, the control doesn't see the door locked and continues to try to lock the door. Here is the part to

...a GE profile 975pb that keeps flashing locked locked in green but the oven doors are in the locked position but are open? Ge profile 975 Unlock the doors when open. Lock the doors when closed

...door lock time exceeded. F94 Maximum oven door lock attempts exceeded. 1. (F90, 91, 92, 93 & 94) Check the wiring between EOC & Lock Motor Micro Switch. 2. (F90, 91, 92, 93 & 94) Replace ...

...door lock mechanism/ can try one thing . open door, hold door light switch in if you have one on your model not all models do.then turn on self clean let it run for about 5 minutes and see if it ...

...door lock time exceeded. F94 Maximum oven door lock attempts exceeded. 1. (F90, 91, 92, 93 & 94) Check the wiring between EOC & Lock Motor Micro Switch. 2. (F90, 91, 92, 93 & 94) Replace ...

Oven door not locking for clean cycle When clean cycle is set door lock mechanism goes off and on. It does not keep the door locked so the clean cycle can stay on. cool down

door lock motor mechanism failure. The control board is not detecting the lock motor operating/rotating. Try pressing the "Clear/Cancel" button. If the door does not unlock then it could have a faulty