Question about Buck Vehicle Parts & Accessories
my battery went dead and now my remote doesn't work and the keyless entry doesn't work either. reprogram remotes turn ignition key to on position push valet 5 times then hit the lock button on remote
Question about Vehicle Parts & Accessories
...keyless entry keyfob worked perfectly. Recently, it stopped working. Thinking the problem was a dead battery, I let the local auto parts store replace the battery with a fresh one to no avail. can ...
Question about Python Vehicle Parts & Accessories
...You may have lost the memory or the battery is dead(might be) or incorrectly installed. Sometimes you have to check the little contacts to for proper tension against the correct points of el
...keyless remote. It gets through the step where the key is in the ignition and cycles through to lock and unlock. When I press the lock on the remote twice, the red light blinks on the key fob but ...
Question about Bulldog Security Vehicle Parts & Accessories
...up the tachometer wire and program the remote starter unit to start in the "tach" mode. That way it will continue cranking until the vehicle starts on your battery goes dead, whichever comes
battery was all most dead but it did start help please it sounds like the chips have been eliminated, if so...... 1) turn ignition "on" and then "off" 2) within 10 seconds push the valet buttons three
Question about Crime Stopper Vehicle Parts & Accessories
...the factory wires and start over. Also check the ground for the alarm as it will draw current from what ever wire it can and cause all kinds of things. Sounds like the battery is dead in the
...keyless entry, remote start, or combination of the three? if you're SURE its just a remote start, you need to find the control module. it will probably be a black box, probably a bit larger than a ...
20 questions posted
Usually answered in minutes!
12 Questions