Craftsman 1/2" Impact Wrench "air vanes" Questions

...air motor is probably shot. Turn the socket a few revolutions by hand, and see if it frees up and starts working. A couple of firm raps on the workbench might help. Otherwise take it apart and see ...

the air motor disassemble andtake 0000 steel wool to the cylinder and get the motor vanes out of the rotor and clean the rotor slots with mineral spirits and a jewelers file till the vanes move freely

...air wrench vanes sticking I use IR 261 guns. We tighten 1000 1/2" bolts a day per gun. I cannot keep a gun running for more than a few days before the vanes stick into the rotor and you can't get the ...

...air, and blow it out. 3. Remove the cover on the head that covers the vanes. Make sure that the vanes will slide freely, and that all gaskets and "O" rings are in good condition. If you note any dry ...

...air-flow. Vanes can become stuck if stored for long period of time. Pour small amount of diesel fuel into the gun and activate the trigger. The fuel should come out clean, if however black gunk comes ...

...air vanes have frozen in place and can't hold the air in to operate the unit,make sure when you do this squeeze thge trigger to let the oil into the units barrel,then connect to an air supply and try ...

ingersoll rand 231A 1/2 inch impact wrench no power if you have already used air tool oil you may have to take it apart and clean the motor vanes

1/2-in.impact wrench model 875.191183 dose not have the power to lossen bolts with no air leaks the vanes ore wore out

...The air pressure is 150 psi but does not turn the rotor go get some wd 40 unless its totally locked up as in you cant turn it by hand, then one or more internal vanes are jammed inside on the ...

need new air vanes, how much? Try this link: Part Listing Order Page