Craftsman 1/2" Impact Wrench "craftsmane work" Questions

Ad

Question about Craftsman Air Tools & Compressors

1 Answer

Craftsman 1/2 inch impact wrench,not working I have a Craftsman 1/2 inch impact wrench, when I pull the trigger all you hear is air escaping but there is no turning of the shaft? Make sure you have at

Ad

Question about Craftsman Air Tools & Compressors

1 Answer

where do i get a replacement trigger, mine is where do i get a replacement trigger for my craftsman 1/2 impact wrench, mine is broken If your local Sears store can't help you, try looking to see if ...

Ad

Question about Craftsman Air Tools & Compressors

1 Answer

my air ratchet does not work. Head will not turn and air comes out of breathing vents, like it seized up I put some lubrication oil into the air line then made sure that it goes in there by moving the

Question about Craftsman Air Tools & Compressors

1 Answer

impact wrench is not working at all.the air is coming out of the hole at the bottom of wrench next to where the air hose is hooked up. fill down the air pipe wit penatrating oil hold trigger and keep ...

Question about Craftsman Air Tools & Compressors

1 Answer

I get no movement on the socket just air blowing out of the bottom of the gun The air motor is probably shot. Turn the socket a few revolutions by hand, and see if it frees up and starts working. A ...

Question about Craftsman Air Tools & Compressors

2 Answers

throttle valve is rotten and tool runs when you plug in the air without pulling trigger there is a neoprene O ring in the trigger area ,that breaks down ,it needs a service by an air tool repairer ,it

Question about Craftsman Air Tools & Compressors

2 Answers

my impact wrench wont engage to the socket. I have the same problem, brand new impact wrench, brand new impact sockets, but can't get a socket onto the gun. Leaned on it with all my weight, wiggled, ...

air impact tool does not engage but will eventually engage after switching directions. I have a standard duty 1/2" Craftsman pnuematic impact tool. problem is it seems to not engage in gear, however ...

Question about Craftsman Air Tools & Compressors

1 Answer

the trigger stop working the ratchet works but i have play with the air hose on and off to use it. i oil it. sounds as if it needs servicing ,not expensive -----what do you oil it with ? if you dont ...

Question about Craftsman Air Tools & Compressors

2 Answers

wont work in remove direction just blows air fill it wit oil hold in triger and flick between forard and reverse should free up the vains inside Squirt in some pnuematic oil where you hook up the hose

Not finding what you are looking for?
Craftsman 1/2" Impact Wrench Logo

44 questions posted

Ask a Question

Usually answered in minutes!

Top Craftsman Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1420 Answers

JOHN LAPIER

Level 3 Expert

2595 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

206 Answers

Are you a Craftsman Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...