At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
HELP!!! My 1979 suzuki ts250 starts and runs fine but when i put it in gear and release the clutch it stalls. it was going fine the other day and i dont think it has a safety on the stand. Any Ideas
is there a safety switch for the side stand you could look and see if the is one it will have a wires coming from itis there a safety switch for the side stand you could look and see if the is one it will have a wires coming from it
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The most likely thing is a sticking clutch. With the ignition off, can you drop it into second gear and push it with the clutch pulled in? You say you put 'new petrol' in, so it sounds like it has been stored for a while. Clutches will often stick as the clutch plates have been under pressure for so long. Fully warm the engine before moving off until the plates free up.
And it looks like you probably mean VS1400 not VS400!
Hey Michelle,,
This is something that will have to be looked into.. Sounds like the clutch may not be working.. it won't engage/disengage..(the clutch plates are stuck together - a common thing when older bikes sit for a while!!).. this will require the right side cover to be removed, the clutch cover plate removed, the clutch plates(fiber and metal) to be removed, then cleaned, oiled and everything re-installed in reverse order..with a new side cover gasket..
You MIGHT be able to put the bike in gear.. then try to push it (engine not running) with the clutch lever pulled in and get the clutch plates to break loose (seen this work a couple times)..
You SHOULD be able to push the bike(engine not running) in gear with the clutch lever pulled in!!!
is there a safety switch for the side stand you could look and see if the is one it will have a wires coming from it
Here is your solution » Honda »
Suzuki » Yamaha » kawasaki » Others a
×