So i have a 98 ninja zx9r, and recently my clutch cable lost all tention whatsoever.. and so i checked the cable.. the cable is fine.. but the return spring on the outside is broken, my clutch plates contstantly spin but wont disengage when i pull the clutch lever the cable is connected to. im not sure what could be wrong, i dont know much about bikes but could it be internally?
On your bike there are two clutch parts that can wear and cause this problem. The broken spring should be replaced but is not causing the problem. Check the bottom of the clutch release shaft #13102. The end of the shaft may be broken, bent or severely worn. The part the shaft engages with is the clutch rod #46102. It could be bent, broken or severely worn. This part is inside the clutch hub. Just remove the five springs and then the outer cover plate and the rod should be accessible.
1-2-4-3, 1 being on the left when looking forward.
Dose anyone know the firing order to a 97 zx9
5,043 views
Usually answered in minutes!
×